Page 1 of 1
Re: Vu+ Bootlogo's / Update
Posted: 23 Oct 2015, 11:04 pm
by kalpikos
Grey bootlogo for vu+ receivers
The files go to /usr/share folder
You can download it here:
Code: Select all
http://www97.zippyshare.com/v/gPtQW6WV/file.html
Re: Vu+ Bootlogo's / Update
Posted: 27 Oct 2015, 5:39 pm
by kalpikos
MS-2010 bootlogo for vu+ receivers
The files go to /usr/share folder
You can download it here:
Code: Select all
http://www33.zippyshare.com/v/Y6CUHUk4/file.html
Re: Vu+ Bootlogo's / Update
Posted: 30 Oct 2015, 3:26 pm
by kalpikos
Splashscreen for VU+
To the start screen to flash (the very first boot logo) (splash_cfe_auto.bin), proceed as follows:
- Formatting a USB stick with FAT32 and create the following folder structure / vuplus/duo2 / or / vuplus/solo2 / (with the older models is different)
- Attention: to show upper or lower case in the eighth case, spaces, etc. the folder must be named exactly the same, otherwise it does not work
- Box shutdown, turn off the back, remove all USB flash drives, insert the flash drive you just created and used as the image, flash (goes very quick, is only one file)
You can download it here:
Code: Select all
http://www7.zippyshare.com/v/kYQxNVhM/file.html
Re: Vu+ Bootlogo's / Update
Posted: 31 Oct 2015, 10:21 pm
by kalpikos
Splashscreen for VU+
To the start screen to flash (the very first boot logo) (splash_cfe_auto.bin), proceed as follows:
- Formatting a USB stick with FAT32 and create the following folder structure / vuplus/duo2 / or / vuplus/solo2 / (with the older models is different)
- Attention: to show upper or lower case in the eighth case, spaces, etc. the folder must be named exactly the same, otherwise it does not work
- Box shutdown, turn off the back, remove all USB flash drives, insert the flash drive you just created and used as the image, flash (goes very quick, is only one file)
You can download it here:
Code: Select all
http://www23.zippyshare.com/v/BP8Kf9zq/file.html
Re: Vu+ Bootlogo's / Update
Posted: 20 Dec 2015, 1:35 am
by kalpikos
Rainbow Splashscreen for VU+
To the start screen to flash (the very first boot logo) (splash_cfe_auto.bin), proceed as follows:
- Formatting a USB stick with FAT32 and create the following folder structure / vuplus/duo2 / or / vuplus/solo2 / (with the older models is different)
- Attention: to show upper or lower case in the eighth case, spaces, etc. the folder must be named exactly the same, otherwise it does not work
- Box shutdown, turn off the back, remove all USB flash drives, insert the flash drive you just created and used as the image, flash (goes very quick, is only one file)
You can download it here:
Code: Select all
http://www69.zippyshare.com/v/ySXnDCwS/file.html