many times we see that the ram (memory) of the solo is full , not enough free space (M.bytes)
so you can extend, create more free space the memory of you decoder by creating a SWAP -FILE>>>
First you need is a usb stick, my case is 2GB.
Format USB stick on PC with Fat 32.
Then press 2 times the blue button on remote control and go to format the usb
stick (follow the wizard setup).Then will automatic reboot the receiver.Go to the device manager to mount the usb stick.And final go to Swap file settings (2 times on blue button on remote control) and press green button to create the swap file.You can choose 8MB,16MB,32MB,128MB,256MB.
Then press red button to activate the swap file.