|•.♥.•| Vu+ Tutorials |•.♥.•|

sunsong
Registered Member
Registered Member
Posts: 144
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

|•.♥.•| Vu+ Tutorials |•.♥.•|

Post by sunsong » 22 Jun 2013, 6:50 pm

Here you find some tutorials of Vu+ DIGITAL RECEIVER

^^ How to flash a VU+ Duo using a USB stick ^^


Image

Step by step tutorial on how to flash your VU+ Duo receiver with a USB stick.

The only things you need are:

A. Your favorite image for Vu+ Duo
B. 128mb (or high) memory stick formatted FAT32.

1. Format you memory stick on your PC in FAT32.
2. Make a folder in your USB stick called vuplus.
3. Inside the vuplus Folder make another folder called duo.
4. Unzip the USB upgrade files into that folder.
5. Turn your power off on your VU+ Duo.
6. Put memory stick into front USB slot on Vu+ Duo.
7. Turn on power on your VU+ Duo and follow the on screen instructions.

Image
Image

sunsong
Registered Member
Registered Member
Posts: 144
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Vu+ Tutorials |•.♥.•|

Post by sunsong » 22 Jun 2013, 6:51 pm

^^ How to flash a VU+ Solo using a USB stick ^^

Image

Format a usb flash drive to Fat32.

1. On the USB stick create a folder and name vuplus inside that folder create another folder and name it solo.

2. Download the USB version of a image and unrar. Now send the boot, kernel and root file to the solo folder.

3. Insert your USB stick in the front USB port. Then on the rear of your solo press the reset button.

When the VU Solo start the standby light will be RED. You should see the led light on your USB flashing. This shows the SOLO is reading the USB stick.

After a while you'll see the LED on your USB stop flashing. When this happens it means your SOLO is been programmed from internal memory after reading the USB drive.

When your Standby light turns green the flashing process is over and you can remove the USB stick.

Press the reset button on the rear again and the Solo will boot into the enigma2 setup process.

Image
Image

sunsong
Registered Member
Registered Member
Posts: 144
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Vu+ Tutorials |•.♥.•|

Post by sunsong » 22 Jun 2013, 6:52 pm

^^ Flash Your VU+ With Serial & Null Modem Cable NFI Images ^^

Image

First setup a static IP on the Image you have now.

Menu --> Setup --> System --> Network --> adapter settings.

Power down the solo and connect a Null modem cable and a Ethernet cable.

1. Start the Vu Util

2. Select you comport from the dropdown menu.

3. Now click on the connect button. You should see a Message Serial port open success. At this point power up the solo

4. You will now see the progress bar move and the message will come up setup IP. Enter your PCs IP in the Local IP box and your
Solo static IP in the remote IP box. Then press the setup IP button. You should see it report success.

5. Next click on the open button and select you solos image in nfi format.

6. Press the flash button. After few minutes your image will be flashed reboot your solo.

Image


Vu+Util 2.0.1 by sunsong

Image
Image

sunsong
Registered Member
Registered Member
Posts: 144
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Vu+ Tutorials |•.♥.•|

Post by sunsong » 22 Jun 2013, 6:57 pm

^^ Vu+ Manual Download ^^

Image

You can download the manual for each language you want here.

Duo

English
German
Russian
Turkish

Solo

English
German
Russian
Turkish

Uno

English
German
Russian
Turkish

Ultimo

English
German
Russian

Image
Image

Post Reply Previous topicNext topic