HOW TO RECOVER BRICK WETEK PLAY2.

[taree]

i read this helpfull tutorial in a spanish forum.
translated it with google translator...so it will be several mistakes in spelling..sorry for this
=========================================================================
I tried to downgrade the WebOS v3.1 without seeing warn that it is not recommended to downgrade the android, that was me cause various problems, follow what is normal with a 2GB uSD methyl the file and everything seemed to go well until the end and 2 wetek.play never showed signs of life.

After researching extensively and almost giving up I came across this tutorial member Thrall and got that damn back to life:
There are three methods you can try when they try to regain Wetek Play 2 a boot problem I got with the method Briked Recovery can find at the end of this post.

Here it is for those who, like me, do mess up.

This procedure is the most basic to try to give life to Wetek Play 2, sometimes the system files may become corrupted and it must be this Manual Factory Reset .

Turn off aa wetek play two current
Below the equipment has a button labeled Update Button, or even Reset / Recovery must insert a thin object, usually from behind factory equipment one piece to do this if you can not use a toothpick to press this button.
While pressing this button turn on the box and keep pressed for 10 seconds will now display the recovery menu .
Choose the Wipe Data / Factory Reset
This procedure will erase all your files and settings when it finished choose the option seuinte Reboot System Now .

this manual soft recovery is for Wetek Play 2, can solve some of the most complicated problems you may have, be aware that you must first exprimentar Recovery Reset method and does not work should try this.

Try installing again SDcard
If you see the message "press the power button to boot form the internal nand"
Press the Power button to run from the nand system.
If it did not work try this method of installing a new image.
First need to download tooland format your sdcard with this program.
Then you have to download this folder 2:02 Clean Install.zip containing 4 files and to extract them.
2:02 Clean Install.zip
/ / / /
Copy the files to the root of your SDcard formatted, you should see something of the genre in the SDcard root

- DB-J235-wetekplay2-master-ota-2017-01-19_17-46-13
- DTB
- factory_update_param
- recovery
Turn off aa wetek play 2 on the power supply
Insert the SDcard
Below the equipment has a button labeled Update Button, or even Reset / Recovery must insert a thin object, usually from behind factory equipment one piece to do this if you have not you can use a toothpick to press this button.
While pressing this button turn on the box and keep pressed for 10 seconds and the installation should begin at that time can release the button.

Sometimes we can brick the wetek play two , perhaps corrupt files when sending to the nand, or even a downgrade of android (operating system), this manual hard Soft Recovery Bricked will help this type of situation usually on TV or nothing appears.

To solve this kind of situation follow this tutorial.

We turn off the wetek play two of the chain.
We downloadthe program will allow us to communicate with the box.
We connect the cable RS-232 the box and open the PuTTY and configured for serial mode with port speed to 115200
will call the play wetek 2 and stopped with the boot (CTRL + C)
will appear the information #interrupt
Now we put the following commands

Code:
defenv
saveenv
reset
The box starts to boot normally with Android pre - installed.
If you are unsure call the box with PuTTY leave here one data cable connection Manual RS-232 to USB adptador the wetek play 2 if you have a PC with RS-232 port.

[Chacha G]

you are going to purchase this box at the end of Dec. aur tayyaryan(preparations) abhi say sharoo ker di hein

[taree]

yes ..i m reading everything about this box
as its looks like very difficult and complicated to handle compare to enigma2.
filhal to sub kuch ooper ooper se guzar raha hai

[taree]

yesterday i brick my wetekplay2 during an experiment.
but recover today with this method told by belaid

2 files needed for this purpose
http://www.mediafire.com/file/4f3zu9d8r ... belaid.rar
http://www.mediafire.com/file/054gp2j7a ... laid38.rar

and method
http://www.star7arab.com/f.asp?t=821689&pg=1

[Athart]

yesterday i brick my wetekplay2 during an experiment.
but recover today with this method told by belaid

2 files needed for this purpose
http://www.mediafire.com/file/4f3zu9d8r ... belaid.rar
http://www.mediafire.com/file/054gp2j7a ... laid38.rar

and method
http://www.star7arab.com/f.asp?t=821689&pg=1

Aakhir brick krne ki esi kia majboori thi

[DM 900uHD]

Aakhir brick krne ki esi kia majboori thi

may be Tariq wants to bring a little "tabdeeli" to run videocon on this box

[taree]

enigma2 users ke hathon mein har waqt khugli hoti rehti hai
is liye experiment kiya

[DM 900uHD]

enigma2 users ke hathon mein har waqt khugli hoti rehti hai
is liye experiment kiya

aur jub bricked box recover/revive hota hay uss waqt jo khushi milti hay ...andaza lgana mushkal hay
by the way @Tariq ...abhi after recovery wetek ki importance/value mei mazeed azafa ho gia ho ga

[Aliraza63]

enigma2 users ke hathon mein har waqt khugli hoti rehti hai
is liye experiment kiya

Enigma2 konsa use kar rehe han ap is pr . ek OpenAtv me ne bhi develop kia tha .kisi page pr upload bhi kia tha . exactly yad nhi kehan upload kia tha .
Ok the main question .did u try IPTV over enigma2 ?

[taree]

enigma2 with wetekplay2 is useless.
i never find any stable e2 image for wp but experiment a lot in earlier days after purchasing wp2.
my main interest is android side which is working very smooth.
also tried librelec and coreelec both but never satisfied.
in e2 most images were modified and i never tried iptv in that side.
iptv in android side is good although android 5 lollypop is old but very stable.