Sun hd horizental tps

OmMeE
Registered Member
Registered Member
Posts: 201
Joined: 22 Feb 2017, 2:47 pm
Has thanked: 2 times
Been thanked: 10 times
Contact:

Sun hd horizental tps

#21



Post by OmMeE »

ali03000345 wrote: 04 Apr 2018, 7:32 am mujhe confirm to nahi lakin Focus main KU band nahi C-band lnb ati hai aur KU k liye aaj kal log inverto black ultra use krte hain around 1500 milegi
Inverto black ultra for Karachi is usually used for hard reaching satellites to get maximum signals. E.g. 88E, 13E, 7W, etc.

And KU mei focus aati hai.
ali03000345
Senior Registered Member
Senior Registered Member
Posts: 913
Joined: 15 Dec 2017, 9:21 am
Has thanked: 57 times
Been thanked: 98 times
Contact:

Sun hd horizental tps

#22



Post by ali03000345 »

aap keh rahe hain to zaroor ati hogi main ne daikhi nahi is liye kaha k confirm nahi wese 88, 7 to ajate hain normal per bhi han 13 k liye inverto use ki jati hai woh bhi is liye k ziada bari dish na lagani pare
niceabi
Registered Member
Registered Member
Posts: 239
Joined: 19 Aug 2014, 10:49 pm
Contact:

Sun hd horizental tps

#23



Post by niceabi »

OmMeE wrote: 04 Apr 2018, 8:50 pm
niceabi wrote: 03 Apr 2018, 9:39 pm focus brand lnb is good or Lazer?
Lazer is better. I have Focus and Lazer and for satellites such as SUN HD, Dish tv, Videocon, ETC. Focus is MOOOORE than enough.

Focus costs Rs.350 in Karachi and Lazer is above Rs.1500. I bought it for Rs.1700.
I have lazer lnb
usamafalak
Registered Member
Registered Member
Posts: 16
Joined: 02 Apr 2018, 12:11 pm
Been thanked: 1 time
Contact:

Sun hd horizental tps

#24



Post by usamafalak »

Check the basic setting on your receiver side
in antenna setting select both 13/18 V
connect lnb directly without diseqc switch and then scan you should get signal on both horizontal and vertical tps
usamafalak
Registered Member
Registered Member
Posts: 16
Joined: 02 Apr 2018, 12:11 pm
Been thanked: 1 time
Contact:

Sun hd horizental tps

#25



Post by usamafalak »

if this doesn't work then select the horizontal tp and check the voltage on the cable output, it should be 18v for horizontal and 13v for vertical.
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No User AvatarDot, No User Avatarkya kaise.sb, No User Avatartrendiction and 138 guests