Umair Malik wrote: ↑30 Sep 2018, 11:19 am
Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver
This Will Be Setting
Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E
Disqec 1.1
The Port On Which You Connected The LNB
*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch
thanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?
In Case If You Are Using 8 Pin Diseqc
This Will Be The Setting
Connect Paksat To( For Example )1st Port Of 8-Pin Diseqc And In Receiver Paksat's Diseqc Setting Will Be
Diseqc 1.1 LNB 1
Diseqc 1.0 = None
Similarly For Asiasat 7 It Will Be Connect Asiasat 7 To Port Number 8 Of 8-Pin Diseqc And In Receiver Asiasat 7 Diseqc Setting Will Be
Diseqc 1.1 LNB 8
Diseqc 1.0 = None
For Monoblock LNB Connect It To Port Number 2 Of 8-Pin Diseqc Switch And In Receiver Monoblock's Setting Will Be
For Dish TV,DD Free Dish,Sun HD 95E+93E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 1
azkar_pk wrote: ↑01 Oct 2018, 2:03 am
no need any switch only Burst B for 93/95E and burst A use for 88E.
like old dish tv HD 100.5E and 95E setting, only rotate your lnb from up side to downward.
WP_20180502_21_19_12_Pro.jpg
Bhai uss ki post parho woh keh rha hei ke monoblock lnb ke sath 3rd sat bhi chalana hei uss ke liye disqec switch aur power pass ki zarorat hoti hei
Bhai post uski hai k, "is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb "
Jab ik hi monobloc lnb per 3 satellites aasakti hain tou diseq ki kiya zaroorat?
For eg. One lnb per aap araam se 93+95e set kar saktay hain.... tou monobloc ki ik lnb per ye set kar lain and dosray per 88e. Where does the diseq switch come in??
thanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?
In Case If You Are Using 8 Pin Diseqc
This Will Be The Setting
Connect Paksat To( For Example )1st Port Of 8-Pin Diseqc And In Receiver Paksat's Diseqc Setting Will Be
Diseqc 1.1 LNB 1
Diseqc 1.0 = None
Similarly For Asiasat 7 It Will Be Connect Asiasat 7 To Port Number 8 Of 8-Pin Diseqc And In Receiver Asiasat 7 Diseqc Setting Will Be
Diseqc 1.1 LNB 8
Diseqc 1.0 = None
For Monoblock LNB Connect It To Port Number 2 Of 8-Pin Diseqc Switch And In Receiver Monoblock's Setting Will Be
For Dish TV,DD Free Dish,Sun HD 95E+93E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 1
Why is the diseq necessary? Monobloc runs all 3 satellites perfectly.
One lnb is set to 93+95 and the other lnb is set to videocon.
Well Diseqc Is Necessary In That Case If He Wants To Watch Paksat 1R 38.5E Or Asiasat 7 105.5E As Well.By Connecting Monoblock LNB Directly To Receiver Without Using Diseqc Switch He Will Be Bound To Watch These Three Sattelites (95E,93.5E,88E) Only
Starsat 2000 Extreme HD
Starsat 2000 Hyper HD Sony KD49X8500B Shabir 8-Feet Motorized (With Auto Positioner)
Coverage:-115E To 3.1E Fixed=105E(C),95E+93.5E(KU),91.5E(C),38.5E(C+KU),26E(KU),13E(KU),9E(KU)
Umair Malik wrote: ↑01 Oct 2018, 10:33 pm
Well Diseqc Is Necessary In That Case If He Wants To Watch Paksat 1R 38.5E Or Asiasat 7 105.5E As Well.By Connecting Monoblock LNB Directly To Receiver Without Using Diseqc Switch He Will Be Bound To Watch These Three Sattelites (95E,93.5E,88E) Only
Ohhhh... So your reply was actually for, IF he wants to use more than 3 satellites??
Mohsin.m17 wrote: ↑30 Sep 2018, 10:07 am
hi every one is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb on 2 ft dish. plz experts reply.
Brother 93/95E aur 88E in satellite k elawa aap ko switch ki zarorat paray gi but agar aap nay sirf yahi satellite laganay hain tu aap ko kisi kisam k swtich ki zarorat nae hai 93E aur 95E ek LNB aur 88E dosri LNB pay aata hai. as per below pictures.
aap ka base satellite 95E hoga.
enigma 2 receivers k elawa agar aap mono block LNB use kertay ho tu aksar switching problem aa jata hai behtar hai keh aap 2LNBs lagain. tekeh dosray satellites ki switching main problem na ho.
azkar_pk wrote: ↑02 Oct 2018, 4:03 pm
enigma 2 receivers k elawa agar aap mono block LNB use kertay ho tu aksar switching problem aa jata hai behtar hai keh aap 2LNBs lagain. tekeh dosray satellites ki switching main problem na ho.
by the way this is good idea to have a saperate lnb
