is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
-
- Registered Member
- Posts: 492
- Joined: 14 Jul 2017, 7:17 pm
- Location: Sukkur
- Has thanked: 37 times
- Been thanked: 22 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
thanks umair bhai now i understand all the settings
-
- Registered Member
- Posts: 192
- Joined: 30 Oct 2015, 12:49 pm
- Has thanked: 5 times
- Been thanked: 29 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Its possible bro 4 pin diseqc switch surly works but you need 2 way splitter and 4 pin diseqc switch,in receiver settings just use lnb 1 for dishtv 95e and 93.5e and lnb 2 for videocon 88e. And lnb 3 for 3rd lnb just see below picture i am using it also this wayUmair Malik wrote: ↑30 Sep 2018, 11:19 am Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver
This Will Be Setting
Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E
Disqec 1.1
The Port On Which You Connected The LNB
*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch
- sarfraaz184
- Registered Member
- Posts: 88
- Joined: 04 Feb 2014, 1:55 am
- Has thanked: 38 times
- Been thanked: 65 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
enigma2 recevers pe diseq or spliter ki zaroort nhein hoti monoblock main 1.1 diseq bilt in hota hai
dreambx920uhd
Vu+Duo
Samsung ju50 4k led
Vu+Duo
Samsung ju50 4k led
-
- Registered Member
- Posts: 52
- Joined: 17 Feb 2014, 11:23 pm
- Has thanked: 5 times
- Been thanked: 7 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
no need any switch only Burst B for 93/95E and burst A use for 88E.
like old dish tv HD 100.5E and 95E setting, only rotate your lnb from up side to downward.
[attachment=0]WP_20180502_21_19_12_Pro.jpg[/attachment]
like old dish tv HD 100.5E and 95E setting, only rotate your lnb from up side to downward.
[attachment=0]WP_20180502_21_19_12_Pro.jpg[/attachment]
-
- Registered Member
- Posts: 192
- Joined: 30 Oct 2015, 12:49 pm
- Has thanked: 5 times
- Been thanked: 29 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Bhai uss ki post parho woh keh rha hei ke monoblock lnb ke sath 3rd sat bhi chalana hei uss ke liye disqec switch aur power pass ki zarorat hoti hei
-
- Registered Member
- Posts: 201
- Joined: 22 Feb 2017, 2:47 pm
- Has thanked: 2 times
- Been thanked: 10 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Umair B,Umair Malik wrote: ↑30 Sep 2018, 2:43 pmIn Case If You Are Using 8 Pin DiseqcMohsin.m17 wrote: ↑30 Sep 2018, 2:12 pmthanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?Umair Malik wrote: ↑30 Sep 2018, 11:19 am Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver
This Will Be Setting
Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E
Disqec 1.1
The Port On Which You Connected The LNB
*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch
This Will Be The Setting
Connect Paksat To( For Example )1st Port Of 8-Pin Diseqc And In Receiver Paksat's Diseqc Setting Will Be
Diseqc 1.1 LNB 1
Diseqc 1.0 = None
Similarly For Asiasat 7 It Will Be Connect Asiasat 7 To Port Number 8 Of 8-Pin Diseqc And In Receiver Asiasat 7 Diseqc Setting Will Be
Diseqc 1.1 LNB 8
Diseqc 1.0 = None
For Monoblock LNB Connect It To Port Number 2 Of 8-Pin Diseqc Switch And In Receiver Monoblock's Setting Will Be
For Dish TV,DD Free Dish,Sun HD 95E+93E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 1
For Videocon D2H 88E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 2
Why is the diseq necessary? Monobloc runs all 3 satellites perfectly.
One lnb is set to 93+95 and the other lnb is set to videocon.
-
- Registered Member
- Posts: 201
- Joined: 22 Feb 2017, 2:47 pm
- Has thanked: 2 times
- Been thanked: 10 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Bhai post uski hai k, "is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb "knightrider wrote: ↑01 Oct 2018, 8:17 amBhai uss ki post parho woh keh rha hei ke monoblock lnb ke sath 3rd sat bhi chalana hei uss ke liye disqec switch aur power pass ki zarorat hoti hei
Jab ik hi monobloc lnb per 3 satellites aasakti hain tou diseq ki kiya zaroorat?
For eg. One lnb per aap araam se 93+95e set kar saktay hain.... tou monobloc ki ik lnb per ye set kar lain and dosray per 88e. Where does the diseq switch come in??
- Umair Malik
- Moderator
- Posts: 6974
- Joined: 18 Jun 2013, 3:54 am
- Location: Attock City/Taxila Cantt
- Has thanked: 247 times
- Been thanked: 1657 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Well Diseqc Is Necessary In That Case If He Wants To Watch Paksat 1R 38.5E Or Asiasat 7 105.5E As Well.By Connecting Monoblock LNB Directly To Receiver Without Using Diseqc Switch He Will Be Bound To Watch These Three Sattelites (95E,93.5E,88E) OnlyOmMeE wrote: ↑01 Oct 2018, 10:11 pmUmair B,Umair Malik wrote: ↑30 Sep 2018, 2:43 pmIn Case If You Are Using 8 Pin DiseqcMohsin.m17 wrote: ↑30 Sep 2018, 2:12 pm
thanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?
This Will Be The Setting
Connect Paksat To( For Example )1st Port Of 8-Pin Diseqc And In Receiver Paksat's Diseqc Setting Will Be
Diseqc 1.1 LNB 1
Diseqc 1.0 = None
Similarly For Asiasat 7 It Will Be Connect Asiasat 7 To Port Number 8 Of 8-Pin Diseqc And In Receiver Asiasat 7 Diseqc Setting Will Be
Diseqc 1.1 LNB 8
Diseqc 1.0 = None
For Monoblock LNB Connect It To Port Number 2 Of 8-Pin Diseqc Switch And In Receiver Monoblock's Setting Will Be
For Dish TV,DD Free Dish,Sun HD 95E+93E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 1
For Videocon D2H 88E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 2
Why is the diseq necessary? Monobloc runs all 3 satellites perfectly.
One lnb is set to 93+95 and the other lnb is set to videocon.
Starsat 2000 Extreme HD
Starsat 2000 Hyper HD
Sony KD49X8500B
Shabir 8-Feet Motorized (With Auto Positioner)
Coverage:-115E To 3.1E
Fixed=105E(C),95E+93.5E(KU),91.5E(C),38.5E(C+KU),26E(KU),13E(KU),9E(KU)
Starsat 2000 Hyper HD
Sony KD49X8500B
Shabir 8-Feet Motorized (With Auto Positioner)
Coverage:-115E To 3.1E
Fixed=105E(C),95E+93.5E(KU),91.5E(C),38.5E(C+KU),26E(KU),13E(KU),9E(KU)
-
- Registered Member
- Posts: 201
- Joined: 22 Feb 2017, 2:47 pm
- Has thanked: 2 times
- Been thanked: 10 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Ohhhh... So your reply was actually for, IF he wants to use more than 3 satellites??Umair Malik wrote: ↑01 Oct 2018, 10:33 pm
Well Diseqc Is Necessary In That Case If He Wants To Watch Paksat 1R 38.5E Or Asiasat 7 105.5E As Well.By Connecting Monoblock LNB Directly To Receiver Without Using Diseqc Switch He Will Be Bound To Watch These Three Sattelites (95E,93.5E,88E) Only
Got it... Thanks
BTW... PM band kyuo hai
-
- Registered Member
- Posts: 52
- Joined: 17 Feb 2014, 11:23 pm
- Has thanked: 5 times
- Been thanked: 7 times
- Contact:
is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?
Mohsin.m17 wrote: ↑30 Sep 2018, 10:07 am hi every one is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb on 2 ft dish. plz experts reply.
Brother 93/95E aur 88E in satellite k elawa aap ko switch ki zarorat paray gi but agar aap nay sirf yahi satellite laganay hain tu aap ko kisi kisam k swtich ki zarorat nae hai 93E aur 95E ek LNB aur 88E dosri LNB pay aata hai. as per below pictures.
aap ka base satellite 95E hoga.
Who is online
Users browsing this forum: No registered users and 183 guests