NEOSAT SX-1900 HD Plus firmware & Flash Tools

Chain
Registered Member
Registered Member
Posts: 50
Joined: 23 Jan 2015, 7:05 am
Contact:

NEOSAT SX-1900 HD Plus firmware & Flash Tools

Post by Chain » 23 Feb 2015, 10:27 am

Dear
all i have NEOSAT SX-1900 HD Plus. My receiver is dead. pls anybody give me firmware & Flash Tools download link.

Chain

yasirfraz75
Junior Member
Junior Member
Posts: 1
Joined: 29 Oct 2014, 10:31 am
Contact:

Re: NEOSAT SX-1900 HD Plus firmware & Flash Tools

Post by yasirfraz75 » 14 Jul 2015, 12:20 pm

I nedd neosat sx-1900 hd plus software

timematcher
Junior Member
Junior Member
Posts: 1
Joined: 29 Mar 2018, 11:59 pm
Contact:

NEOSAT SX-1900 HD Plus firmware & Flash Tools

Post by timematcher » 14 Apr 2018, 12:15 am

Hi
Here is the software for NEOSAT SX-1900 HD PLUS
hxxps:[//]receiverinstalltion[DOT]blogspot[DOT]com/2016/08/neosat-1900-hd-plus-china-receiver.html

TO revive dead receiver, you will need Serial Port or Serial to USB port depending upon the type of computer you are using.

You will Need a special EROM upgrade Utility for ALI3601 chipset (There are many on the internet but only this will work for a dead receiver)
hxxps://www[DOT]sendspace[DOT]com/file/vif8am

Only use the Upgrade utility from teh Dump1.ZIP file above.

if you are using a USB to SERIAL/DB9 cable then make sure you setup baud rate to "115200" and Flow rate to "XOn/XOff" and Parity to "Even". Otherwise your cable will not work and the utility will give error


Good Luck.

Post Reply Previous topicNext topic