Dear
all i have NEOSAT SX-1900 HD Plus. My receiver is dead. pls anybody give me firmware & Flash Tools download link.
Chain
NEOSAT SX-1900 HD Plus firmware & Flash Tools
-
- Junior Member
- Posts: 1
- Joined: 29 Oct 2014, 10:31 am
-
- Junior Member
- Posts: 1
- Joined: 29 Mar 2018, 11:59 pm
NEOSAT SX-1900 HD Plus firmware & Flash Tools
Hi
Here is the software for NEOSAT SX-1900 HD PLUS
hxxps:[//]receiverinstalltion[DOT]blogspot[DOT]com/2016/08/neosat-1900-hd-plus-china-receiver.html
TO revive dead receiver, you will need Serial Port or Serial to USB port depending upon the type of computer you are using.
You will Need a special EROM upgrade Utility for ALI3601 chipset (There are many on the internet but only this will work for a dead receiver)
hxxps://www[DOT]sendspace[DOT]com/file/vif8am
Only use the Upgrade utility from teh Dump1.ZIP file above.
if you are using a USB to SERIAL/DB9 cable then make sure you setup baud rate to "115200" and Flow rate to "XOn/XOff" and Parity to "Even". Otherwise your cable will not work and the utility will give error
Good Luck.
Here is the software for NEOSAT SX-1900 HD PLUS
hxxps:[//]receiverinstalltion[DOT]blogspot[DOT]com/2016/08/neosat-1900-hd-plus-china-receiver.html
TO revive dead receiver, you will need Serial Port or Serial to USB port depending upon the type of computer you are using.
You will Need a special EROM upgrade Utility for ALI3601 chipset (There are many on the internet but only this will work for a dead receiver)
hxxps://www[DOT]sendspace[DOT]com/file/vif8am
Only use the Upgrade utility from teh Dump1.ZIP file above.
if you are using a USB to SERIAL/DB9 cable then make sure you setup baud rate to "115200" and Flow rate to "XOn/XOff" and Parity to "Even". Otherwise your cable will not work and the utility will give error
Good Luck.
Who is online
Users browsing this forum: Ahrefs [Bot], Claude, Dot, facebook, Google and 3 guests