Information please

[Noumanqasim]

In Uart menu
what are the uses of
Twin protocol
Sssp
Rs232 option.

[Noumanqasim]

Dr timor bahi please help

[Dr.Timor]

In Uart menu
what are the uses of
Twin protocol
Sssp
Rs232 option.

Twin Protocol : for Connecting Dongle like microbox , Y4 , Morebox & etc...

SSSP : for connecting CCcam cleints softwares like Hadu , Fausto ,vplug & etc.

[Noumanqasim]

How can we use these two options in tiger t6

[Dr.Timor]

How can we use these two options in tiger t6

you can not use 2 option at same time .

[Noumanqasim]

But how can we use both for different purposes. Please explain

[Dr.Timor]

But how can we use both for different purposes. Please explain

I answerd your questions in post #2 .

[Athart]

Twin protocol is a protocol used between digital satellite receiver and satellite dongle (SKS dongle).A satellite dongle is a mini sat receiver converted into a sat modem that connects a receiver to a sharing server.

[Athart]

How to connect AVATAR Dongle with receiver

1.0 Satellite signal and RS232 cable connection
1.1 Install right LNB for data service satellite. ( for example:W3,W3A ,NSS6 or ASIA4,etc.)

1.2 Connect data service satellite signal to Dongle’s LNB IN port

1.3 Use RS232 cable(cross type, we have give it in the dongle parts ) to Connect Dongle RS232 port with the receiver RS232 port ,the receiver must support Y4/Twin protocol

1.4 Plug in Power adaptor and connect to DC+12V port.

2.0 LED display function:
2.1 LOCK LED：
Red color: works as a FTA receiver;
Green color blinking: works as a data Dongle and try locking satellite data signal; （Must connect RS232 cable）
Green color on(no blinking): works as a data Dongle and data signal locked. (Must connect dish and rs232 cable)

2.2 STB LED:
Red color off/On: RS-232 port Y4/Twin protocol communication fail;
Red color blinking: RS-232 port Y4/Twin protocol communication succeed;

3.0 Receiver Setting:
SKS Dongle only works with the Receiver which support Y4/Twin protocol or similar
RS232 communication protocol. Plz confirm your receiver was properly setting or activated to Y4/Twin protocol.