use kingsat line
DM520 Ncam Problem On Videocon D2H
- Shahid Geo
- Moderator
- Posts: 9897
- Joined: 16 Jun 2013, 9:51 pm
- Has thanked: 6409 times
- Been thanked: 3208 times
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
NCam 7.1 is working fine with 88* vid'con ,,,zapping comparatively slower than FTA channels
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
Re: DM520 Ncam Problem On Videocon D2H
As per i know..port 6661 is for cccam..andbport 7771 is for newcamd..
Re: DM520 Ncam Problem On Videocon D2H
Mine 6661 port for cn.smartcam.fun dreambox 800se v2 pr nai chal rhi... Pls koi mera respected member bta k cam issue hai jn koi or
- taree
- Senior Registered Member
- Posts: 894
- Joined: 01 Aug 2013, 3:32 pm
- Has thanked: 686 times
- Been thanked: 417 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
use oscam any version
and post oscam.server and oscam.config files here
will edit it for u to work videocon.
in dm800se videocon working smoothly.no issues
and post oscam.server and oscam.config files here
will edit it for u to work videocon.
in dm800se videocon working smoothly.no issues
VU ZERO 4K
WETEKPLAY2
SAMSUNG 40K5000
WETEKPLAY2
SAMSUNG 40K5000
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
the issue is not so ,figured by you@taree..........encrypted channel opening time takes few seconds(5-8sec.) to open.
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
-
- Registered Member
- Posts: 90
- Joined: 23 Oct 2018, 8:40 pm
- Has thanked: 567 times
- Been thanked: 47 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
Try adding the following line to the reader in oscam.server, it'll quite possibly improve the zapping speed.
d2h is simulcrypting all the channels with 4 CAIDs. This seems to make OScam take some time to figure out which CAID from the server can be used. Note that this will restrict the clearing of channels to d2h at 88E. If you want Dish TV 93.5E/95E to work with the same reader, modify the line in the following manner. This might again deteriorate the zapping speed a bit though!
Code: Select all
caid = 0639
Code: Select all
caid = 0639,0b00
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
[reader]
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
[reader]
label = myconstantcw
enable = 0
protocol = constcw
device = /var/keys/constant.cw
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
group = 1
dropbadcws = 0
disablecrccws = 0
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
####################### CCcam ############################
[reader]
label = server1
enable = 1
protocol = cccam
device = cn.smartcam.fun,06663
user =xxxxx
password = ps6k
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 1
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311
caid =0639
####################### Ncamed ############################
[reader]
label = cn.smartcam.fun
enable = 1
protocol = newcamd
device = rem cn.smartcam.fun,07771
key = 0102030405060708091011121314
user = xxxir35w
password = xxxps3k
fallback = 1
group = 1
disablecrccws = 1
####################### Gbox ############################
[reader]
label = server3
enable = 0
protocol = gbox
mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
group = 3
caid = 0300
after inserting the parameters caid=0639 the "line" stopped working
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
[reader]
label = myconstantcw
enable = 0
protocol = constcw
device = /var/keys/constant.cw
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
group = 1
dropbadcws = 0
disablecrccws = 0
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
####################### CCcam ############################
[reader]
label = server1
enable = 1
protocol = cccam
device = cn.smartcam.fun,06663
user =xxxxx
password = ps6k
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 1
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311
caid =0639
####################### Ncamed ############################
[reader]
label = cn.smartcam.fun
enable = 1
protocol = newcamd
device = rem cn.smartcam.fun,07771
key = 0102030405060708091011121314
user = xxxir35w
password = xxxps3k
fallback = 1
group = 1
disablecrccws = 1
####################### Gbox ############################
[reader]
label = server3
enable = 0
protocol = gbox
mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
group = 3
caid = 0300
after inserting the parameters caid=0639 the "line" stopped working
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
- taree
- Senior Registered Member
- Posts: 894
- Joined: 01 Aug 2013, 3:32 pm
- Has thanked: 686 times
- Been thanked: 417 times
- Contact:
Re: DM520 Ncam Problem On Videocon D2H
method did not work .RiJordy wrote: ↑16 Dec 2018, 12:58 pm Try adding the following line to the reader in oscam.server, it'll quite possibly improve the zapping speed.
Code: Select all
caid = 0639
VU ZERO 4K
WETEKPLAY2
SAMSUNG 40K5000
WETEKPLAY2
SAMSUNG 40K5000
Who is online
Users browsing this forum: Ahrefs [Bot], Google Adsense, monikabansal and 299 guests