Hands on DM 500s

[Aliraza63]

cams can be installed from blue panel.

[Leo5314]

cams can be installed from blue panel.

can i use dsl modem cable with it because i don't have null modem cable (rs232)

[aziz5210]

cams can be installed from blue panel.

can i use dsl modem cable with it because i don't have null modem cable (rs232)

Caution : last time I tried with dsl cable my box got dead.Then after null modem cable it got on.

[Leo5314]

cams can be installed from blue panel.

@Aliraza i want to manual install Oscam because from the blue panel i couldn't understand and please elaborate it
i only want Oscam

[Leo5314]

@ aziz5210 i want to totally reset my dm500 like a new on can you guide. i mean all memory erase and total new installation like firmware and image etc

[suleman84]

@ aziz5210 i want to totally reset my dm500 like a new on can you guide. i mean all memory erase and total new installation like firmware and image etc

Well Dear Ager Ap Oscam use karna Chate ha To Best Ha Ke Ap Kase Image Kha BAckup Install kare Becaue Us Box Ke Memery Space Kam Hota Ha..Ager ap exta chaze Us Me Install kare Ge To ap ko space low Ke problem ho ge or box be hang ho ..best way to use mgcamd ...

Me Personly Us Openpli Image for clone box ..becaue ..wo light hote ha..us se box hang ne hota clone..

http://downloads.pli-images.org/builds/ ... 05-305.zip

Dear Ap Dreamup Se Ye Image install Kare But ap Ko rs232 ke Cable Se Connect Kar kare Ke ap Install kare..

[Leo5314]

@ aziz5210 i want to totally reset my dm500 like a new on can you guide. i mean all memory erase and total new installation like firmware and image etc

Well Dear Ager Ap Oscam use karna Chate ha To Best Ha Ke Ap Kase Image Kha BAckup Install kare Becaue Us Box Ke Memery Space Kam Hota Ha..Ager ap exta chaze Us Me Install kare Ge To ap ko space low Ke problem ho ge or box be hang ho ..best way to use mgcamd ...

Me Personly Us Openpli Image for clone box ..becaue ..wo light hote ha..us se box hang ne hota clone..

http://downloads.pli-images.org/builds/ ... 05-305.zip

Dear Ap Dreamup Se Ye Image install Kare But ap Ko rs232 ke Cable Se Connect Kar kare Ke ap Install kare..

but how to clear all memory i want to swipe all memory.

[Leo5314]

Flashing dreambox 500s-

First get dreamup
Make sure to switch off and unplug your dreambox from the mains before connecting or disconnecting any cables, Null Modem, LNB, LAN, scart lead etc, otherwise this may cause internal damage to the box.
1. Unplug your dreambox from the mains.
2. Disconnect all cables except the Power Cable & a Null Modem Cable connected between your Eagle and PC com port.
3. On your PC install and start DreamUp
4. Select your correct PC Serial Port.
5. Untick “Use Network”
6. Click Connect.
7. When you see the on screen message “Connection Prepared, now switch on the dreambox!” now plug in your dreambox.
8. Click Flash and navigate to the image file on your PC.
9. After installation is complete, exit DreamUp.
10. Unplug your dreambox from the mains and wait at least 1 min.
11. Disconnect Null Modem Cable, Connect LNB, LAN & Scart Cable.
12. Plug in your dreambox and wait for it to boot into setup mode.
13. Perform Setup and scan satellites.
14. Save all new settings by rebooting the receiver. (Menu\Shutdown\Reboot Now)

Dreamup Download-

dreamup.zip

@Aziz my box stuck on language selection and after selecting English it restarts again..
now i cant flash it with flashwizard too..
i need image which could be flashed with dreamup..
there are different images on different sites and have different extensions like .img and fw2
its confusing for me to select one please elaborate little further to solve my problem..

[suleman84]

First You Connect You Box trew Dreamup Than Cline this option your box memery totally clean...now you flash a new image..

[suleman84]

.img and fw2


Dear Dreamup sport .img ..file and

flash wirzed sport fw2 file both are work same ..but flash wirzed use for making backup ..