Dreambox DM500HD Specifications

User avatar
oscamlover
Technical Force
Technical Force
Posts: 1899
Joined: 27 Aug 2013, 1:07 pm
Location: india
Has thanked: 1 time
Contact:

Dreambox DM500HD Specifications

Post by oscamlover » 24 Sep 2013, 10:29 am

Product Description

DM500,Dreambox 500S (DM500S)

Dimensions(L x W x H): 195x130x40mm
Weight: 1.5KG
Powerful satellite receiver for digital TV and Radio programs. Main features are a 250 MHz IBM PowerPC (350 Mips).
Linux OP, the dm500 supports the Standard Linux API
(DirectFB, Linux-FB, LIRC, ...)
Attention: This receiver can share card with IP, record with your PC and so on, we can offer the technology of how to build a share server!



Features:

1) 250 MHz IBM PowerPC Processor (350 Mips)
2) Linux Operating System
3) 1 x Smartcard-Reader
4) MPEG2 Hardware decoding
5) 100Mbit full duplex Ethernet Interface
6) 2 LED status
7) Unlimited channel lists for TV/Radio
8) Channel-change time < 1 second
9) Full automatic service scan
10) Supports directly bouquet-lists (indirect unlimited)
11) Supports EPG (electronic program guide)
12) Supports multiple LNB-Switching control (supports DiSEqC)
13) Fully adaptable OSD in many languages (skin-support)
14) SPDI/F Interface for digital bit stream out (AC-3 / DTS)
15) 1 x Scart-interfaces (fully controlled by software)


Technical Specification:


M Tuner with 45K SR support in 8psk


Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4: 3 / 16: 9
Footage 16: 9, automatic assimilation for 16: 9 TV-Device (over Scart)
Letterbox precolating for 4: 3 TV-Device


Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz


Output analog:
Output Level L/R 0, 5 Vss on 600 Ohm
THD > 60 dB (1 KHz)
Crosstalk < -65 dB


Output digital:
Output Level 0, 5 Vss on 75 Ohm
Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz
S/PDIF-Output optical (AC3)


Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-VHS over OSD selectable


Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115, 2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming


Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming


LNB Power and polarisation:
LNB Current 500mA max.; Short-circuit-proof
LNB Voltage vertical < 14V without load, > 11, 5V at 400mA
LNB Voltage horizontal < 20V without load, > 17, 3V at 400mA
LNB shut-off at Standby-Mode


Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption: < 10W / 12V
Input voltage: DC12V, alternating acurrent +/- 15%


Extern power supply:
Input: 110-240V AC / 50-60Hz / 0, 6A
Output: 12V = / 2A
Weight:2 KGs

<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT


User avatar
oscamlover
Technical Force
Technical Force
Posts: 1899
Joined: 27 Aug 2013, 1:07 pm
Location: india
Has thanked: 1 time
Contact:

Re: Dreambox DM500HD Specifications

Post by oscamlover » 24 Sep 2013, 10:33 am

Dreambox DM800HD Specifications

Powerful receiver for digital TV and Radio programs.

Main features are a 400 MHz processor the dreambox DM 8000 supports the Linux TV API

MPEG-2 / H.264 decoding
10/100MBit compatible Ethernet Interface
DVD support
Twin-DVB-S2 tuner
optional DVB-C or DVB-T
mixable, plug & play
big size OLED display


Technical data

400 MHz MIPS Processor
Enigma 2, Linux Operating System
brilliant big-size OLED - Display
MPEG-2 /H.264 Hardware decoding
TWIN DVB-S2 tuner
2 x Plug&Play tuner sockets
optional for DVB-S, DVB-C or DVB-T
4 x DVB Common-Interface Slot
2 x Smartcard-Reader (Dreamcrypt CA)
V.24/RS232 Interface
Integrated Compact Flash and SD Card Slot
10/100 MBit compatible Ethernet Interface
3 x USB 2.0 (1 x front, 2 x back)
S/PDIF Interface for digital bit stream out (AC-3)
2 x Scart-interfaces
S-Video
YPrPb (Component)
DVI
Audio/Video cinch out
128 MByte Flash, 256 MByte RAM
2 x integrated SATA
- support for internal HDD 3,5" in any capacity
- support for SATA SlimLine DVD
embedded WiFi (Mini-PCI device inl. antenna)
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
Videotext Decoder
multiple LNB-Switching control (DiSEqC)
OSD in many languages and skin-support


DreamBox DM8000 technical data

DBS-Tuner:
Frequency Range 950...2150 MHz
QPSK Demodulation EN 302 307
Signal Level - 65 dBm...- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %

Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

VCR-Scart:
FBAS

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

USB:
USB 2.0 connector (3x)

SATA Interface:
for internal HDD
Compact Flash - Reader
SD Card - Reader

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode

Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 10W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm
Weight: 3,0 kg without HDD a. DVD

<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT


User avatar
oscamlover
Technical Force
Technical Force
Posts: 1899
Joined: 27 Aug 2013, 1:07 pm
Location: india
Has thanked: 1 time
Contact:

Re: Dreambox DM500HD Specifications

Post by oscamlover » 24 Sep 2013, 10:35 am

Sunray3 800 SR3 Specification
2.S/C/T Three in One Tuner 3.Support hd, SIm2.1
HD DVB- receiver Sunray 800 SR3
Tuner: Three-in-One DVB-S2/C/T, Tuner can be used at the same time.
Powerful receiver for digital TV and Radio programs.

SIM 2.1,84 bootloading and Gemini 5.1.Depeds on the technology you can control it.
300 MHz MIPS Processor
Linux Operating System
OLED - Display
MPEG-2 / H.264 Hardware decoding
Tuner: Three-in-One DVB-S2/C/T
Tuner Module, Plug&Play
1 x Smartcard-Reader (Dreamcrypt CA)
V.24/RS232 Interface
10/100Mbit Ethernet Interface
1 x Scart (RGB, FBAS or S-Video)
DVI
2 x USB 2.0
analog modem
S/PDIF Interface for digital bit stream out (AC-3)
64 MByte Flash, 256 MByte RAM
SATA
For use either as internal SATA HDD 2,5
Or to use for extern eSATA
Unlimited channel lists for TV/Radio
Channel-change time < 1 second
Automatic service scan
Directly bouquet-lists
EPG (electronic program guide)
Multiple LNB-Switching control (supports DiSEqC)
OSD in many languages and skin-support
Videotext Decoder
Extern 12V power supply
DBS-Tuner mit DVB-S2:
Frequency Range 950.... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 31 Mbaud/s (8PSK) , 10 30 Mbaud/s (QPSK)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Devices
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink
Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
- for use either as internal HDD 2,5 or eSATAor internal 2,5" HDD
USB
2 x USB 2.0 Host
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 15W at 12V
External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A

<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT


Post Reply Previous topicNext topic