|•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥.•|

sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

|•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥.•|

#1



Post by sunsong »

Image

Here you find some Tutorials for DREAMBOX DIGITAL RECEIVER

Image

^^ How to flash your Dreambox DM500 HD with DreamUp ^^

Image

First disconnect the box from main power
Start the program “DreamUp”

Image

Attach box with rs232 Cable

Image

Select your Com Port or use network
If network: Enter the local IP from your PC, enter a remote IP for your Box

Image

Press the "Connect" button and then connect the box to main power
Wait a moment

Image

After the flash loader is transferred into the Box select the firmware by pressing
the "Flash" button then select the firmware and click "open"

Image

Upload starts now, please wait

Image

Box is flashing the new firmware into the flash memory, please wait

Image

Flashing done, press "OK"
Press "disconnect then exit"
Restart the box

Image

Image


DreamUP 1.3.3.9 [Last] by sunsong

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#2



Post by sunsong »

^^ HOW TO CONNECT DREAMBOX WITH PC ^^

Image

First download DCC (Dreambox Control Center Setup)
After downloading Unrar DCC to a folder and start the program with the DCC.exe
First thing to do is select your Language and enter your Dreambox password.

Image

Now we need to select your Network configuration, most of you will have a router so this needs to be selected

Image

At this point if you know your Dreambox and Router IP's enter them manually if not press the search button below the router and then the search button on the popup.

Image

When DCC has finished searching your router will normally be the lowest ip in a range so highlight it and press accept.

Image

You can now repeat this to find the Dreambox IP or use the following method.
Menu-Setup-Expert Setup-Communication Setup.
You'll see your IP at the top of the page make a note of this and enter this IP in DCC under the Dreambox ICON.
Also untick the DHCP box so your Dreambox IP will never change and remain static.
After you have inserted the IP's click the reconnect button under the PC icon. If you have done this correctly all lines to the router and dreambox should now be green.

Image

Image


DCC 2.96 [Last] by sunsong

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#3



Post by sunsong »

^^ How to Send CCcam Server to DreamBox ^^

Image

Image

1 - Select an option as shown in the picture
2 - Select English
3 - Put IP Dreambox
4 - Put Page modem
5 - Enter user's name root
6 - Enter password dreambox
7 - then Click here to start the connection with dreambox

Image

If the color appears green, it means that he has been successfully connect todreambox and if the red color appears be sure to enter a good data

Then click FTP.

Image

OPEN var FILE

Image

OPEN etc FILE

Image

Locate subscription file, and then Select it and send it As is clear in the image

will show you the message click on yes to approve the replacement

as well the file be sent up successfully for Dreambox
For other contributions:
If you have a file subscription Newcamd: you send file to the track
var / tuxbox / config / newcamd
If it subscription file it mgcamd Send to
var / keys
If you have a subscription CCcam sent to
var / etc

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#4



Post by sunsong »

^^ Manually Transfer Keys To Your Dreambox ^^

Image

Extract the keys of your choices to a folder
Start DCC and click on the FTP tab

Image

In the Left hand window of DCC you will see the folders on your Dreambox and in the right hand window the folders on your PC

Image

In the right hand window off DCC navigate to where you extracted your Dreambox keys go in one level so you can see the keys and scce folders and in the left hand window navigate to var/keys.

Image

In the right hand window enter the keys folder and select them all. Now press the Transfer arrow to transfer the files over to var/keys in the right hand window

Image

Now go up a level in both window so you have var/scce in the left hand window and enter the scce folder in the right hand window. Now press the Transfer arrow to transfer the files over to var/scce in the right hand window

Image

Now reboot your Dreambox Menu-shutdown-reboot now

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#5



Post by sunsong »

^^ Transfer A Channel List To Your DreamBox ^^

Image

First download Dreamset
Unrar Dreamset and place all the files into a folder.
Start the program with the little dish icon.
Click setup.

Image

Click the setup Tab at the top and fill in your IP and passwords.

Image

On the Firmware Tab for Enigma1 (500-7020) select Enigma 1 (rel109) for Enigma 2 (DM7025) and (800-800) use Enigma 2 version 3 or 4. Ensure passive FTP is ticked.

Image

Now click the save configuration tab and then the test configuration tab to check we have a connection to the Dreambox. If successful press OK and then OK again.

Image

Now click open and scroll to the settings and select the services for E1 and lamdb file for E2 and open.

Image

Now click the transfer button and then write and wait for it to finish.

Image

Image


Dreamset 2.39 [Last] x86


Dreamset 2.39 [Last] x64


Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#6



Post by sunsong »

^^ Dreambox Image Backup ^^

Image

The purpose of this guide is to provide a backup which is made with the purpose of restoring your Dreambox back to a state preferred by you. This guide uses a null modem cable and the backup created will be flashable only with DreamUp via a null cable.

This type of backup is ideal for situation when you have lost network communications to your Dreambox through a corrupt image.

Ensure your Dreambox is switched off before making cable connection and leave it powered of till later.

Start DreamUp and ensure the use network box is unticked.
In the port box ensure the correct com port is selected.

Image

Click on the connect button and wait for the Connection prepared now switch on your Dreambox prompt.

Image

Switch on your Dreambox.

Image

Now click the backup button and enter a name for your Dreambox Backup in the file name box ending the file name with .img then click save.

Image

Your backup will now start and will take around 12 minutes.

Image

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#7



Post by sunsong »

^^ Dreambox Image Restore ^^

Image

Start DreamUp and ensure the use network box is unticked.

Image

Click on the connect button and wait for the Connection prepared now switch on your Dreambox prompt.

Image

Switch on your Dreambox.

Image

Now click the Flash button and select your Dreambox Backup and click open.

Image

Your restore will now start and will take around 12 minutes.

Image

Image
Image
sunsong
Registered Member
Registered Member
Posts: 111
Joined: 19 Jun 2013, 7:13 pm
Location: Mauritania
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#8



Post by sunsong »

^^ Change Your Dreambox Password With DCC ^^

Image

1. Click on telnet then you get a black screen
2. Type on the screen login
“root”, “dreambox” if default then type password

3. It will give you the option to type a new password be careful because you do not see any letters come on the screen. Type the password then hit return and retype it again, then you will see password changed.

If you see the bad password: too weak, ignore it and retype the same as you did first.


Here are pictures:

Image

Image

Image

Image

Image
Image
-=ANJAAN BUGTI=-
Registered Member
Registered Member
Posts: 196
Joined: 19 Jun 2013, 4:55 pm
Location: ♥♥DERA BUGTI♥♥
Been thanked: 4 times
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#9



Post by -=ANJAAN BUGTI=- »

:thank: :thank: :thank:
!//! Alone but happay !//!
User avatar
kami2k
Gold Contributor
Gold Contributor
Posts: 1287
Joined: 16 Jun 2013, 7:42 pm
Location: Muzaffarabad - Azad Kashmir
Has thanked: 42 times
Been thanked: 9 times
Contact:

Re: |•.♥.•| Dreambox Tutorials With Pictures by sunsong |•.♥

#10



Post by kami2k »

any way to save and restore disque setting after flashing new image?
.....(¯`v´¯)
..... ·.¸.·´
...¸.·´
.. (
☻/
/▌
/ \ Spread LOVE and PEACE . Press "Thanks" ♥

Intel 8700K |CM |GIGABYTE Z370|G.SKILL Ripjaws 16GB |SSD 256GB,8TB|Gigabyte GTX 1050 2GB|CM 750W|46" Samsung|VU+ SOLO2:UNO
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot], User avatarGoogle Adsense, User avatarYandex and 215 guests