go to folder etc/ rc.local
put that
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
/var/bin/multics -C /var/etc/multics.cfg -b
exit 0
Script auto restart MultiCS in dm800
- oscamlover
- Senior Registered Member
- Posts: 946
- Joined: 27 Aug 2013, 1:07 pm
- Location: india
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Script auto restart MultiCS in dm800
<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT
- oscamlover
- Senior Registered Member
- Posts: 946
- Joined: 27 Aug 2013, 1:07 pm
- Location: india
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: Script auto restart MultiCS in dm800
start multics for telnet:
/usr/bin/multics -C /etc/multics.cfg -vb
/usr/bin/multics -C /etc/multics.cfg -vb
<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT
- oscamlover
- Senior Registered Member
- Posts: 946
- Joined: 27 Aug 2013, 1:07 pm
- Location: india
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: Script auto restart MultiCS in dm800
Multics config tips
To stop cache for specific profile
On the profile setting add:
Code:
CACHE TIMEOUT: 1
-------------------------------------------
To receiving dcw from cache
Code:
DISABLE CACHE = 1
-----------------------------------------------------------
To active ecm filter to stop fake ecm on global profile add:
Code:
DEFAULT DCW CHECK: 1
---------------------------------------------------------
& (if you are using cache)
Code:
CACHE PORT: xxx
ACCEPT NULL ONID: 0
------------------------------------------------------
To assign N line to specific profile example:
Code:
N: xxx.dns 123 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 { 1111 }
# where 1111 is your profile port no
----------------------------------------------
To send cache to your local other Multics or CSP or Oscam
Code:
TRACE: 1 127.0.0.1 44100
Where ia 44100 is cache port of (other Multics or CSP or Oscam)
To stop cache for specific profile
On the profile setting add:
Code:
CACHE TIMEOUT: 1
-------------------------------------------
To receiving dcw from cache
Code:
DISABLE CACHE = 1
-----------------------------------------------------------
To active ecm filter to stop fake ecm on global profile add:
Code:
DEFAULT DCW CHECK: 1
---------------------------------------------------------
& (if you are using cache)
Code:
CACHE PORT: xxx
ACCEPT NULL ONID: 0
------------------------------------------------------
To assign N line to specific profile example:
Code:
N: xxx.dns 123 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 { 1111 }
# where 1111 is your profile port no
----------------------------------------------
To send cache to your local other Multics or CSP or Oscam
Code:
TRACE: 1 127.0.0.1 44100
Where ia 44100 is cache port of (other Multics or CSP or Oscam)
<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT
- oscamlover
- Senior Registered Member
- Posts: 946
- Joined: 27 Aug 2013, 1:07 pm
- Location: india
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: Script auto restart MultiCS in dm800
Install MultiCS on open pli enigma2 script
FTP multics.mips to /usr/bin folder
rename it to multics
chmod it 755
Create a file called cardserver.multics
add the below script to it
FTP it to /etc/init.d folder
chmod it 755
code
---------------------
#!/bin/sh
remove_tmp () {
rm -rf /tmp/.multics /media/usb/multics/*
}
case "$1" in
start)
remove_tmp
sleep 3
exec start-stop-daemon -S -x /usr/bin/multics -- -b -r 2 -c /var/etc
exit
;;
stop)
exec start-stop-daemon -K -R 2 -x /usr/bin/multics &
sleep 2
killall -9 multics 2>/dev/null
sleep 2
remove_tmp
sleep 2
exit
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
FTP multics.mips to /usr/bin folder
rename it to multics
chmod it 755
Create a file called cardserver.multics
add the below script to it
FTP it to /etc/init.d folder
chmod it 755
code
---------------------
#!/bin/sh
remove_tmp () {
rm -rf /tmp/.multics /media/usb/multics/*
}
case "$1" in
start)
remove_tmp
sleep 3
exec start-stop-daemon -S -x /usr/bin/multics -- -b -r 2 -c /var/etc
exit
;;
stop)
exec start-stop-daemon -K -R 2 -x /usr/bin/multics &
sleep 2
killall -9 multics 2>/dev/null
sleep 2
remove_tmp
sleep 2
exit
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT
- oscamlover
- Senior Registered Member
- Posts: 946
- Joined: 27 Aug 2013, 1:07 pm
- Location: india
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: Script auto restart MultiCS in dm800
converter Cccam to Multics config
software
link...........
https://www.sendspace.com/file/8xpd9g" onclick="window.open(this.href);return false;
software
link...........
https://www.sendspace.com/file/8xpd9g" onclick="window.open(this.href);return false;
<ATTENTION FOR NEW MEMBER>
->AUTHENTICATION AS PM, URL LINK OPEN AFTER 10-12 POST
->NEVER USE SPAM ,ONLY SMILIES OR WORLDS LIKE "THANKS,NICE INFO TYPE"
->NEVER USE MOBILE NUMBERS,EMAIL OR OTHER WAY OF CONTANT
Who is online
Users browsing this forum: Apple, Bytespider, Dot, Google, Google Adsense and 243 guests