How to recover your DM800 SE Clone with SunRay-FlashUp and B

Post Reply
User avatar
tani
Registered Member
Registered Member
Posts: 261
Joined: 17 Jun 2013, 1:35 am
Location: Albania

How to recover your DM800 SE Clone with SunRay-FlashUp and B

Post by tani » 19 Oct 2013, 1:53 am

How to recover your DM800 SE Clone with SunRay-FlashUp and Browser


First you need a USB-A To mini-usb-B to connect to service socket on back of receiver, and a Network cable to Connect Receiver to PC


Image


1--- Connect USB cable to service slot on DM800SE/DM500HD and USB slot on Pc. Windows will then install the driver as per bellow
You will notice, windows created a virtual Com Port connection to be be used ( in this case Com Port 4)


Image


2 --- Switch Receiver off and connect Network cable to Pc

3 --- Then Start SunRay- FlashUp, Tick Use Network, Fill the relevant boxes with local pc IP and Romote ip of your choise and click Connect.


Program will ask for you to Switch on the receiverIt will show as per Bellow


Image


4 -- It will then go into HTTP mode


Image


5 -- At this stage, you open your browser and insert the romote IP you chose when setting the Sunray. In this case 192.168.0.12. Page will open as per bellow and then you chose the option Update Firmware.


Image


6 --- A page like this will open and you click Browse to take when your image is


Image


7 --- Chose the image and click Open




8 --- It will then go into the field as per bellow and you click Flash


Image


9 --- Image will start writing to Dreambox's Flash as per picture


Image


10 --- When it finishes you can click the back button of your browser


Image

11- .. and chose the SSL82 for your DM800SE Clone


Image


12 --- Once again Click Flash


Image


13 -- After finishing click Reboot. In Most case you will need to do so manually



11- Box will then reboot and come back to life with image we chose to load. Then you can load your Patched image of your coice as box is functional again


ENJOY
----------------------------------------------------------------------------------------------------------------------------------------------
Dreambox 800se HD Clone a8p sim

LNB-Hotbird 13 E,Hotbird Eurobird 16 E,Astra 19 E

asadq1
Senior Registered Member
Senior Registered Member
Posts: 642
Joined: 02 Sep 2013, 3:34 pm

Re: How to recover your DM800 SE Clone with SunRay-FlashUp a

Post by asadq1 » 14 May 2014, 3:06 pm

Nice sharing

Post Reply