# gbox config file

# Trace, Debug
#    xx yz ; xx=00 no konsole output
#    xx yz ; xx=01 konsole output
#    xx yz ; y=0 debug output (dont use)
#    xx yz ; y=1 no debug output
#    xx yz ; z=0 ouput to konsole
#    xx yz ; z=1 output to /var/tmp/debug.txt
#    xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 10 } 192.168.2.10 8024

# gbox working mode
#    00 pure Emu
#    01 pure SoftCam (when card inside), Emu (when no card inside)
#    02 pure Net Client
#    03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
#    00 dont show any ECMs
#    01 show only valid ECMs
#    02 show valid and bad ECMs with complete data display
#    1X show ca access
#    2X use nagra aladin 1801 in betacrypt mode (for UM-I02)
C: { 01 }

# Display EMM messages on Konsole
#    00 dont show any EMMs
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
#    1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
#    00 is ignored (default)
#    01 enable AU
#    02 Auto AU !!!!! always use this !!!!!
A: { 02 }

# Key Update
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
#    00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
#    01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
#    00 keyfiles in /var/keys
#    01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
#    00 No OSD (default)
#    01 display Smartcard messages in Neutrino
#    02 display Smartcard messages in Neutrino new nhttpd format
#    03 display Smartcard messages in Enigma
#    04 display Smartcard messages in Enigma2
O: { 00 } 192.168.2.108 root

# Logger and NET-mode UDP port Init
#    00 do not init UDP port
#    01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
#    *x ** ; x = device nummber to be used (0= default)
#    D* ** ; force use of /proc/bus/gtx for cw write operations
             (in the dbox2 the gbox writes directly the CWs, 00 is the
             recommended mode ! No drivers are required) use D* ** ONLY if
             you have Problems. 0* ** should be prefered !!!
#    F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
#    ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
#    ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
#    ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
#    ** *z ; z=0001b (0x*1) use com1 as Multicam
#    ** *z ; z=0010b (0x*2) use com2 as Multicam
#    ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
#    ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
#    ** *z ; z=0100b (0x*4) invert CTS detection on com1
#    ** *z ; z=1000b (0x*8) invert CTS detection on com2
V: { 00 33 }

# RS232 SSSP mode
#    x    debug messages, 1=on, 0=off
#     y   com port to use (0=none, 1=com1, 2=com2)
R: { 00 }

# Task type
#    00 **  normal mode gbox mode (no season, use Multicam instead)
#    01 **  Season Emulation in a Irdeto allcam chid 0602 nonZ
#    10 **  Season Emulation in a Irdeto allcam chid 1702 nonZ
#    11 **  Season Emulation in a Irdeto allcam chid 1702 Z
#    12 **  Season Emulation in a Irdeto allcam chid 1722 Z
#    13 **  Season Emulation in a Irdeto allcam chid 1762 Z
#    ** *1  Com port to use for season emulatiom (1 or 2)
#    ** 0*  Use CTS for RST detection
#    ** 1*  Use DCD for RST detection
#    ** **   9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default seting in case you expirience Problems,
# normaly these setings are not required.

# GboxTwin mode
# this options for the 2nd gbox ONLY
# you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp,
# all other files can linked to the org. files
#F: { A6 } 5

# cpu, api, cw write method
#     00 auto
#     01 80X86
#     02 MPC823
#     03 IBM STB04xxx
#        00 auto
#        01 ibm
#        02 api2
#        03 api3
#           00 cw write style = use internal routine (only dbox2)
#           01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
#           02 cw write style = CA_SET_DESCR type2
#           03 cw write style = CA_SET_DESCR type3
#           04 cw write style = 16 byte /proc/bus/gtx
#           05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
#              xx write cw in 1st device with index=xx
#                 yy write cw in 2nd device with index=yy
#                    01 means with .index=0 (default)
#                    02 means with .index=1
#                    03 means with .index=0 and .index=1
#                    .. any bitwise combination ...
#                    FF means with all 8 indexes (0-7)
#J: { 00 03 01 00 00 }

# Files, folders, devices
#          folder/device             comment
F: { 01 } /tmp/pmt.gbx		// pmt file
#F: { 02 } /var/tmp/emm.info		// key update log file
#F: { 03 } /var/tmp/ecm.info		// ecm info file
#F: { 04 } /var/tmp/atack.txt		// atack info file
F: { 08 } 1			// pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys			// folder for config files
#F: { 12 } /var/tmp			// folder for temporary file
#F: { 13 } /var/tmp			// folder for keyfiles
#F: { 21 } /dev/null			// ca device
#F: { 22 } /dev/null			// dvr device
#F: { 23 } /dev/null			// demux device
#F: { 31 } /dev/null			// second ca device to write cw's (recording)
#F: { 41 } /dev/sci0			// STB04xxx slot1
#F: { 42 } /dev/sci1			// STB04xxx slot1
#F: { 43 } /dev/tts/0			// rs232 com1
#F: { 44 } /dev/tts/1			// rs232 com2

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
#F: { 51 } 02                        // irdeto
#F: { 52 } 03                        // seca
#F: { 53 } 03                        // viaccess
#F: { 54 } 03                        // nagra
#F: { 55 } 03                        // crypto
#F: { 57 } 03                        // conax
#F: { 58 } 03                        // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# change for running on octagon 1008 IRD firmware


#F: { 12 } /tmp
#F: { 21 } PTI2
#F: { 22 } PTI2
#F: { 23 } PTI2
