Golden Multimedia Forum

Then it must be the setting in the antenna menu. Check the LNB power it should be at 13V/18V.

Explain in what way you connect two KU lnbs with two receivers.

We can't use this splitter or power pass everywhere, Its only use in such condition where H/V transponders are not selected by 18/13 volts by receiver, like in the case of using S.S Ftype C band LNB and also can be used with simple single antenna type LNB.

OK , so problem solved

So haven't you checked yet with USB ??

Masood wrote:I observe the variation while switching any button in OFF/ON mode not only with LCD if an energy saver is ON

It seams that lcd picks some kind of interference through it's input sources. What about when you watch something through usb ,does it fliks ??

Regards.

Please kindly mention the time when lcd flickers, i mean when ups turns on after the line gone or when line comes and ups is going to charging mode.

Regards.

Dear Masood when fixing the feed horn please note the focal point of the dish must fall slightly inside the feed horn. It can be calculated with this formula.
a = (d * f) / D - (d * D) / (16 * f)
where:
a = distance the focus should be inside the feedhorn
D = diameter of the dish
d = diameter of the ...

Example : The offset satellite dish

Height .......................... = 74.80 Inch

Width ........................... = 70.86 inch

Max Depth ................. = 9.5 inch

Hence using my formula we find :

Focal length = ( 74.80 x 74.80 x 74.80 ) / ( 16 x 9.5 x 74.80 ) = 31.29 inch
sum of above ...

At least you should use modified sine wave type
and for that my current UPS can be modified, what I'll have to do ,,,the main kit /motherboard needs to be replaced ?
another alternate ?If I decrease the voltage gradually ,won't work ?
In my opinion modification is not possible due to iron core ...