Lnb Configuration in Dreambox 800HD pvr

[Aliraza63]

its so helpful with pics

[dodi2000]

http://golden-mgcamd.net/dreambox-discu ... t7320.html

thanks for help but diseqc setting and system setting are different system is working on h/v 13/18 volt system installer set dishes setting some 13 volt and some 18 volt .

system switcher is like this its only for 4 receivers but in multi stories building they have more then 4 output



example see this pic with one dish and one lnb how many out puts

[Rizwan Awan]

What do you mean about successful scan, but no channel ?

[dodi2000]

Friends yesterday i spend again 1 hour on this box and i set the 6 satellites according this picture and above mention diseqc but only one satellite scan other fail
here is my setting

diseqc 1 asiasat 22khz off
diseqc 1 badar 22 khz auto
diseqc 2 nilesat 22khz auto
diseqc 3 paksat 22khz off
diseqc 4 nss6 22khz auto
diseqc 4 intelsat 22 khz off.

[taree]

uncommited diseqc command=none
change it to input 3.
commited diseqc command= none
it is used in diseqc 1.0
and u r using 1.1?

[Rizwan Awan]

Do you getting Signals from all inputs ? , as you said earlier, channels scans

[dodi2000]

Do you getting Signals from all inputs ? , as you said earlier, channels scans

yes my starsat receiver getting all the satellite signals.

yes my first scan was ok and when i exit the scan to see the channel it shows service not found.
any how now i massup i will scan only four satellite which one i need and these are

nilesat
paksat
nss6
asiasat
please guide me for only these satellite setting.