Signal accessing issue @95*E

[Rizwan Awan]

I don't think there is any local cable in copper, they are all copper coated

[suleman84]

butt saab Mera bhe NSS6 signal ka issue tha pher mai Cox cable change kar deya problem teek hogaya agar Lahore meh russia ya iran made ka wire mil jaye to bhut acha hoga

here in local market only china copper coaxial cable is available and that is already checked earlier .
aap nay kub aana hay ?Torkhum border completely khul chuka hay .....meray liay Russian taar ka aik roll lay aana

hahhahah Ab ap ni Dr Sub De Demand kar De ha. ... Wo Only border per ... Dry fruit Sale Karene Athe ha Na ke ap Ko cable Gift Karene....

[Dr.Timor]

[chazer]

The reason behind this is Local oscillator freq witch changes from 9.75GHz to 10.60GHz on detection of 22kHz in Universal type KU LNB and this function perform by the receiver autometically.If other Tps of above 12GHz faces the same problem then it could be due to lac of 22kHz signal approaching LNB but as Mr Masood said only 12170 is effected doesn't make sense.

I agreed to your logics ..what do you recommend to solve my issue? is there any switch works to boost the signals ?

By lengthening the cable between box and the satellite dish create more potential for signal loss and outside interference. An active (powered) multiswitch placement between the line can help to alleviate the problem, but a multiswitch needs dual Line with dual LNB. With complex routing of cable can be a big challenge.

[Masood]

sorry for late confirmation ,the issue was solved as I replaced the coaxial cable of a good quality.