How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

User avatar
jahan25
Senior Registered Member
Senior Registered Member
Posts: 830
Joined: 07 Oct 2014, 2:49 pm
Location: Quetta,Balochistan
Has thanked: 121 times
Been thanked: 5 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by jahan25 »

manc wrote:Hi,
1.download the rescue file from the following link.

https://www.4shared.com/zip/Vo7CXRyUce/manc-rescue.html" onclick="window.open(this.href);return false;

2. Un-zip the file and copy the spark folder in to USB stick (make sure your USB stick only have 1 partition and the file system is FAT32)
3. Off the receiver, if its On.
4. Connect USB stick to STB backside USB port and follows the given instructions with care.
http://i59.tinypic.com/xpuiqs.jpg" onclick="window.open(this.href);return false;
5. Keep Pressing [OK] Button in Front Panel, then on STB power.
6. After 5 seconds, you will see [Forc] in LED, release [OK] button and click
[Channel Up] Button.
7. You will see [spark] shining in LED, now press [Ok]
8. You will see [SUCC] and STB reboot automatically in Spark mode.

if any problem , pm me.
Bhai main yah sb kuch Ker Choka hu ab Receiver 00:00 say agay nai jata hai or ab is ki Flash Ur CHoki hai shahid Talib bhai sahi karay kukay us kay pass ek or be Tareka hai Dektay hai ab kiya hota hai and Thanks bhai ap nay be APna Qemti Waqt mujay deya us ka be main Bohat Shuker Guzar hu...Thnx
Always Happy Like This :) Bro...
:thank: :rock: :happy:

_________________
Always Happy Other People
Then U Feel Happy
talibb
Gold Contributor
Gold Contributor
Posts: 1024
Joined: 03 Jul 2013, 8:09 pm
Has thanked: 5 times
Been thanked: 82 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by talibb »

THe most dangerous post for ok spark rceviers
showing Boot on front
koi bhee mera bhai boot update na karay strongly forbid-en by me
recer ke flash DEAD o jai geeeeeeeee
ek Quetta kay bhai ka recerver flash dead hoo chuka hay
SO DONT DO THIS flash uboot no needed
agar rescue karna hay to meri post say meri guidance mein karooo
jawaidgull
Moderator
Moderator
Posts: 8753
Joined: 08 Nov 2013, 10:13 pm
Has thanked: 359 times
Been thanked: 139 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by jawaidgull »

name or mate wale allaqon min front panel micro switch (cheese par mate aane se) mukhtlef problems ho jate hin. receiver stand by 00:00 show kartahi.

Dr.Timor.

aap expert hin.

min aap ke dil see qdar kart hon.min ne siref apne problem ka hal beyan keya th.

i,m so sorry.

:friend:
talibb
Gold Contributor
Gold Contributor
Posts: 1024
Joined: 03 Jul 2013, 8:09 pm
Has thanked: 5 times
Been thanked: 82 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by talibb »

jawaidgull wrote:THe most dangerous post for ok spark rceviers
showing Boot on front
koi bhee mera bhai boot update na karay strongly forbid-en by me
recer ke flash DEAD o jai geeeeeeeee
ek Quetta kay bhai ka recerver flash dead hoo chuka hay
SO DONT DO THIS flash uboot no needed
agar rescue karna hay to meri post say meri guidance mein karooo
THe most dangerous post for ok spark rceviers
showing Boot on front
koi bhee mera bhai boot update na karay strongly forbid-en by me
recer ke flash DEAD o jai geeeeeeeee
ek Quetta kay bhai ka recerver flash dead hoo chuka hay
SO DONT DO THIS flash uboot no needed
agar rescue karna hay to meri post say meri guidance mein karooo
User avatar
jahan25
Senior Registered Member
Senior Registered Member
Posts: 830
Joined: 07 Oct 2014, 2:49 pm
Location: Quetta,Balochistan
Has thanked: 121 times
Been thanked: 5 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by jahan25 »

Aj main nay apnay Stb ki ( Repairing )Flash ka Software karaya hai ab Spark Working hai like this Pic...Thnx
PHOTO_20160507_211850.jpg
IMG_20160507_213103.jpg
:thank: :rock: :happy:

_________________
Always Happy Other People
Then U Feel Happy
User avatar
sanjaykl
Registered Member
Registered Member
Posts: 302
Joined: 18 Dec 2014, 10:46 pm
Been thanked: 1 time

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by sanjaykl »

jahan25 wrote:Aj main nay apnay Stb ki ( Repairing )Flash ka Software karaya hai ab Spark Working hai like this Pic...Thnx
PHOTO_20160507_211850.jpg
IMG_20160507_213103.jpg
Yaqeenan uboot se nhe hua hoga?
User avatar
jahan25
Senior Registered Member
Senior Registered Member
Posts: 830
Joined: 07 Oct 2014, 2:49 pm
Location: Quetta,Balochistan
Has thanked: 121 times
Been thanked: 5 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by jahan25 »

sanjaykl wrote:
jahan25 wrote:Aj main nay apnay Stb ki ( Repairing )Flash ka Software karaya hai ab Spark Working hai like this Pic...Thnx
PHOTO_20160507_211850.jpg
IMG_20160507_213103.jpg
Yaqeenan uboot se nhe hua hoga?
G bhai yah U Boot say sahi nai huva balkay is U Boot nay mere Stb ko he Flash ker deya mean Spark ura deya
aj local market say is ki Chip ko Re-Programing ker wahi ab all is Well only 600 Pks main...Thnx
:thank: :rock: :happy:

_________________
Always Happy Other People
Then U Feel Happy
User avatar
sanjaykl
Registered Member
Registered Member
Posts: 302
Joined: 18 Dec 2014, 10:46 pm
Been thanked: 1 time

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by sanjaykl »

jahan25 wrote:
sanjaykl wrote:
jahan25 wrote:Aj main nay apnay Stb ki ( Repairing )Flash ka Software karaya hai ab Spark Working hai like this Pic...Thnx
PHOTO_20160507_211850.jpg
IMG_20160507_213103.jpg
Yaqeenan uboot se nhe hua hoga?
G bhai yah U Boot say sahi nai huva balkay is U Boot nay mere Stb ko he Flash ker deya mean Spark ura deya
aj local market say is ki Chip ko Re-Programing ker wahi ab all is Well only 600 Pks main...Thnx
Bhai ye pese b kharch nhe hotay agar jo talib wali post mene apko link ki thi...bilkul same masla meresath b hua tha mene hyperterminal se commands lagain ok hogya.. even memmory card se b rescue hojata he evayn hi kehte the orginal kingston USB se hi rescue hoga.
User avatar
jahan25
Senior Registered Member
Senior Registered Member
Posts: 830
Joined: 07 Oct 2014, 2:49 pm
Location: Quetta,Balochistan
Has thanked: 121 times
Been thanked: 5 times

Re: How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

Post by jahan25 »

sanjaykl wrote:
jahan25 wrote:
jahan25 wrote:Aj main nay apnay Stb ki ( Repairing )Flash ka Software karaya hai ab Spark Working hai like this Pic...Thnx
PHOTO_20160507_211850.jpg
IMG_20160507_213103.jpg
G bhai yah U Boot say sahi nai huva balkay is U Boot nay mere Stb ko he Flash ker deya mean Spark ura deya
aj local market say is ki Chip ko Re-Programing ker wahi ab all is Well only 600 Pks main...Thnx
Bhai ye pese b kharch nhe hotay agar jo talib wali post mene apko link ki thi...bilkul same masla meresath b hua tha mene hyperterminal se commands lagain ok hogya.. even memmory card se b rescue hojata he evayn hi kehte the orginal kingston USB se hi rescue hoga.
Bhai ap nay sahi kaha per mujay phalay samaj main nai a raha tha per ab mujay Terminal ka be achi tara pata CHal gaya or Command ka be Talib bhai say...Thnx
Insan jb kaisi Chez say choot khata hai to agay sambal jata hai.Bro mere sath be yahi huva or ab main samaj Choka hu...
Bhai ap ka be main Bohat Shuker Guzar hu ap nay be Guide kiya per main samaj nai paya...Thnx
:thank: :rock: :happy:

_________________
Always Happy Other People
Then U Feel Happy

Who is online

Users browsing this forum: User avatarBing [Bot], No User AvatarBytespider [Bot], No User AvatarClaude [Bot], No User AvatarDot [Bot], No User Avatarmeta-externalagent [Bot], No User Avatartrendiction [Bot], User avatarYandex [Bot] and 34 guests