Kristen Stewart-Wicardd & Oscam Activation !

[Golden]

I have issue with Doscam (OScam modification) on DCW change. Whan I go to some channel it successfully decrypt it but on first DCW change it completely freeze picture! It works good as emulator and decrypt Digiturk on 7east with softcam keys. Doscam is V0.21.

Anyone has similar issue with oscam or doscam?

But What Happen When Using Sharing Connection ? Despite Using Softcam Keys !
You Are Getting Freeze On 1st DCW Change But What About Next Few DCWs 4th,5th and So On. Are You Facing Freeze On Every DCW Change ?
If So Then Paste Configurations Here.
Show Us OSCam Configurations And Logs.

[Golden]

dear is u r line work in srt 2020 on oscam and its open full dishtv

Avril Lavigne's Service Works In 2020 But What You'll Say If It Opens 95% Of Your Selected Package

[irfan baloch]

dear now days i am at univercity i stay in hostel when i shall go home i shall check it

[Pirat3]

I have issue with Doscam (OScam modification) on DCW change. Whan I go to some channel it successfully decrypt it but on first DCW change it completely freeze picture! It works good as emulator and decrypt Digiturk on 7east with softcam keys. Doscam is V0.21.

Anyone has similar issue with oscam or doscam?

But What Happen When Using Sharing Connection ? Despite Using Softcam Keys !
You Are Getting Freeze On 1st DCW Change But What About Next Few DCWs 4th,5th and So On. Are You Facing Freeze On Every DCW Change ?
If So Then Paste Configurations Here.
Show Us OSCam Configurations And Logs.

Thanks Golden it works good as softcam I have issues when it runs as CS emulator and in that case mainly there's no second DCW and if it do it be after minute or two and then same....frozen picture.


This is my cfg file

Code: Select all

[global]
logfile                       = /media/usb/oscam.log
clienttimeout                 = 500
fallbacktimeout               = 400
dropdups                      = 1
lb_retrylimit                 = 500
zeroconf                      = 0

[dvbapi]
user                          = local
boxtype                       = dreambox

[monitor]
port                          = 16500
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
monlevel                      = 4
hideclient_to                 = 10

[webif]
httpport                      = 7777
httpallowed                   = 0.0.0.0-255.255.255.255
hideclient_to                 = 10

[reader]
label                         = cline
protocol                      = cccam
device                        = My Cline, port
user                          = user
password                      = pass
inactivitytimeout             = 1
group                         = 1
cccversion                    = 2.1.2
cccwantemu                    = 1
ccckeepalive                  = 1

[reader]
label                         = Cline
protocol                      = cccam
device                        = cline,port
user                          = user
password                      = pass
inactivitytimeout             = 1
group                         = 2
cccversion                    = 2.1.2
ccckeepalive                  = 1
 

I'm client and I don't run server.

This looks like when it's frozen



This shows web interface when DCW is OK


When it's frozen looks like DCW is there in cache or something but there's no picture!
Looks like something is stucked !![/b][/color]

[alianum]

thanks for adding me bro
server is working very good speed

[Golden]

Pirat3 Show Logs Also.

[Golden]

You Are Depending On Proxies.
So Client Timeout Should Not Be Just 500 ms In Any Case.
Just Check By Simple Default Configurations And You Should Be Ok.
Don't Use Monitor Stats Also.
Just Put Below Configurations Along With Your Selected Readers And Share The Results.

Code: Select all

[global]
logfile                       = /media/usb/oscam.log
nice                          = -1

[dvbapi]
user                          = local
boxtype                       = dreambox

[Pirat3]

Pirat3 Show Logs Also.

Here it is

Code: Select all

-------------------------------------------------------------------------------
>> DOSCam << started at Fri May  8 22:13:40 2015
-------------------------------------------------------------------------------
2015/05/08 22:13:40        0 s >> DOSCam << started, V0.21 (mipsel-unknown-linux-gnu-libusb)
2015/05/08 22:13:40        0 s creating pidfile /tmp/doscam.pid with pid 9599
2015/05/08 22:13:40        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/05/08 22:13:40        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/05/08 22:13:40        0 s signal handling initialized
2015/05/08 22:13:40        0 s 1 service-id's loaded in 1ms
2015/05/08 22:13:40        0 s 966 provid's loaded
2015/05/08 22:13:40        0 s monitor: initialized (fd=5, port=16500)
2015/05/08 22:13:40        0 s MCLINE [cccam] creating thread for device MCLINE
2015/05/08 22:13:40        0 s MCLINE2 [cccam] creating thread for device MCLINE2
2015/05/08 22:13:40        0 s Slot1 [internal] creating thread for device /dev/sci0
2015/05/08 22:13:40        0 s EMU [constcw] creating thread for device /etc/tuxbox/config/doscam21/SoftCam.Key
2015/05/08 22:13:40        0 s waiting for local card init
2015/05/08 22:13:40 2B000468 h webif: decompressed 50156 bytes back into 144376 bytes
2015/05/08 22:13:40 2B000468 h HTTP Server running. ip=0.0.0.0 port=7777
2015/05/08 22:13:40   5576D8 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted cardmhz=-0.01 MHz
2015/05/08 22:13:40   559260 p EMU [constcw] proxy initialized, server /etc/tuxbox/config/doscam21/SoftCam.Key:0
2015/05/08 22:13:40   537608 p MCLINE: resolved ip=
2015/05/08 22:13:40   537608 p MCLINE [cccam] connecting to MCLINE:18000
2015/05/08 22:13:40   539220 p MCLINE2: resolved ip=XX.XXX.XXXX
2015/05/08 22:13:40   539220 p MCLINE2 [cccam] connecting to MCLINE2:12600
2015/05/08 22:13:40   537608 p MCLINE [cccam] proxy initialized, server MCLINE:18000
2015/05/08 22:13:40   539220 p MCLINE2 [cccam] proxy initialized, server MCLINE2:12600
2015/05/08 22:13:42        0 s init for all local cards done
2015/05/08 22:13:42        0 s anti cascading disabled
2015/05/08 22:13:42   574020 c plain dvbapi-client granted (local, au=on (4 reader))
2015/05/08 22:13:42   574020 c Detected /dev/dvb/adapter0/demux0 Api: 0
2015/05/08 22:13:46   574020 c [ADD PID 0] CAID: 1830 ECM_PID: 1B04 PROVID: 000000
2015/05/08 22:13:46   574020 c Found 1 ECMpids and 2 STREAMpids in PMT
2015/05/08 22:13:46   574020 c New program number: 0056 (1830:0056 unknown) [pmt_list_management 3]
2015/05/08 22:13:46   574020 c local (1830&000000/0000/0056/89:963E): found (95 ms) by MCLINE2 (F/3/3/3)
2015/05/08 22:13:54   574020 c local (1830&000000/0000/0056/89:3520): timeout (501 ms) by MCLINE,MCLINE2 (F/2/2/3)
2015/05/08 22:14:05   574020 c local (1830&000000/0000/0056/89:D420): timeout (501 ms) by MCLINE,MCLINE2 (F/2/2/3)
2015/05/08 22:14:16   574020 c local (1830&000000/0000/0056/89:F643): timeout (502 ms) by MCLINE,MCLINE2 (F/2/2/3)
2015/05/08 22:14:27   574020 c local (1830&000000/0000/0056/89:BBFD): timeout (501 ms) by MCLINE,MCLINE2 (F/3/3/3)
2015/05/08 22:14:38   574020 c local (1830&000000/0000/0056/89:DF8E): timeout (501 ms) by MCLINE,MCLINE2 (F/3/3/3)
2015/05/08 22:14:49   574020 c local (1830&000000/0000/0056/89:237E): timeout (501 ms) by MCLINE,MCLINE2 (F/2/2/3)

...and no picture after first DCW change.

but on some channels with different encryption system it works.....I can post logs when it works OK but it's only couple of channels.


EDIT:

Code: Select all

-------------------------------------------------------------------------------
>> DOSCam << started at Fri May  8 22:20:46 2015
-------------------------------------------------------------------------------
2015/05/08 22:20:46        0 s >> DOSCam << started, V0.21 (mipsel-unknown-linux-gnu-libusb)
2015/05/08 22:20:46        0 s creating pidfile /tmp/doscam.pid with pid 10083
2015/05/08 22:20:46        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/05/08 22:20:46        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/05/08 22:20:46        0 s signal handling initialized
2015/05/08 22:20:46        0 s 1 service-id's loaded in 1ms
2015/05/08 22:20:46        0 s 966 provid's loaded
2015/05/08 22:20:46        0 s monitor: initialized (fd=5, port=16500)
2015/05/08 22:20:46        0 s MyCline [cccam] creating thread for device MyCline
2015/05/08 22:20:46        0 s MyCline1 [cccam] creating thread for device MyCline1
2015/05/08 22:20:46        0 s Slot1 [internal] creating thread for device /dev/sci0
2015/05/08 22:20:46        0 s EMU [constcw] creating thread for device /etc/tuxbox/config/doscam21/SoftCam.Key
2015/05/08 22:20:46        0 s waiting for local card init
2015/05/08 22:20:46 2B000468 h webif: decompressed 50156 bytes back into 144376 bytes
2015/05/08 22:20:46 2B000468 h HTTP Server running. ip=0.0.0.0 port=7777
2015/05/08 22:20:46   5576D8 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted cardmhz=-0.01 MHz
2015/05/08 22:20:46   559260 p EMU [constcw] proxy initialized, server /etc/tuxbox/config/doscam21/SoftCam.Key:0
2015/05/08 22:20:46   539220 p MyCline1: resolved ip=xxxxxxx
2015/05/08 22:20:46   539220 p MyCline1 [cccam] connecting to MyCline1:12600
2015/05/08 22:20:46   537608 p MyCline: resolved ip=xxxxxxxxx
2015/05/08 22:20:46   537608 p MyCline [cccam] connecting to MyCline:18000
2015/05/08 22:20:46   539220 p MyCline1 [cccam] proxy initialized, server MyCline1:12600
2015/05/08 22:20:46   537608 p MyCline [cccam] proxy initialized, server MyCline:18000
2015/05/08 22:20:48        0 s init for all local cards done
2015/05/08 22:20:48        0 s anti cascading disabled
2015/05/08 22:20:48   574178 c plain dvbapi-client granted (local, au=on (4 reader))
2015/05/08 22:20:48   574178 c Detected /dev/dvb/adapter0/demux0 Api: 0
2015/05/08 22:20:52   574178 c [ADD PID 0] CAID: 0500 ECM_PID: 0076 PROVID: 020A00
2015/05/08 22:20:52   574178 c [ADD PID 1] CAID: 0500 ECM_PID: 0077 PROVID: 030A00
2015/05/08 22:20:52   574178 c Found 2 ECMpids and 3 STREAMpids in PMT
2015/05/08 22:20:52   574178 c New program number: 0385 (0500:0385 unknown) [pmt_list_management 3]
2015/05/08 22:20:52   574178 c local (0500&020A00/0000/0385/2A:11E8): found (311 ms) by MyCline (F/2/2/2)
2015/05/08 22:21:02   574178 c local (0500&020A00/0000/0385/2A:33CA): found (317 ms) by MyCline (F/1/1/2)
2015/05/08 22:21:12   574178 c local (0500&020A00/0000/0385/2A:AF47): found (345 ms) by MyCline (F/1/1/2)
2015/05/08 22:21:22   574178 c local (0500&020A00/0000/0385/2A:EBFB): found (303 ms) by MyCline (F/1/1/2)
2015/05/08 22:21:32   574178 c local (0500&020A00/0000/0385/2A:B6D5): found (235 ms) by MyCline (F/1/1/2)
2015/05/08 22:21:43   574178 c local (0500&020A00/0000/0385/2A:4696): found (312 ms) by MyCline (F/1/1/2)
2015/05/08 22:21:53   574178 c local (0500&020A00/0000/0385/2A:3980): found (332 ms) by MyCline (F/1/1/2)
2015/05/08 22:22:02   574178 c local (0500&020A00/0000/0385/2A:1A5C): found (266 ms) by MyCline (F/1/1/2)
2015/05/08 22:22:12   574178 c local (0500&020A00/0000/0385/2A:CE30): found (229 ms) by MyCline (F/1/1/2)

This is log when channel works OK[/color][/b]

[Golden]

emulator itself is not stuck' sending required ecms.
've you tried above mentioned default config ?
tried with latest oscam binary ?

[Pirat3]

You Are Depending On Proxies.
So Client Timeout Should Not Be Just 500 ms In Any Case.
Just Check By Simple Default Configurations And You Should Be Ok.
Don't Use Monitor Stats Also.
Just Put Below Configurations Along With Your Selected Readers And Share The Results.

Code: Select all

[global]
logfile                       = /media/usb/oscam.log
nice                          = -1

[dvbapi]
user                          = local
boxtype                       = dreambox

YEY It works now!!!!

It was default setting (Client Timeout 500) for me. It's really hard to find reliable install these days!!

THANK YOU!!!