As you know, now Oscam Emu supports opening of PowerVu channels in Enigma2 through "Stream Relay method". Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma2. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2. So here is the complete method for watching these channels on Spark Receivers (Enigma2).
Thanks to “joeuser” for providing oscam binary and config files.
Target Recivers: All receivers with STi7111 & 7162 chips (Amiko SHD-8900 Alien, Amiko Alien2, Startrack 2020 HD etc.)
Recommended Images: OpenATV 5, OpenSpa 4, OpenPli based Images.
File Links:
Mega: https://mega.nz/#!3sBHVYya!xj1Sy0GhM9gY ... xyJRhgR20E
Mediafire: https://www.mediafire.com/?37efncs90iwevgt
How to:
Download package from the given link and copy oscam file “oscam-1.20-unstable_svn10888-sh4-linux” and oscam configuration files present inside the “config” folder to the your Enigma2 image at the file paths given below:
File Paths:
oscam: /usr/bin
oscam config files: /etc/tuxbox/config
Important:
In case it does not work then replace your “pti.ko” with the provided “pti.ko” file (don’t forget to keep backup of original “pti.ko” file).
“pti.ko” path: /lib/modules/
Channel Configuration:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19
3EF:1:C00000:0:0:0" onclick="window.open(this.href);return false;:4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0" onclick="window.open(this.href);return false;:
5. For channel list you must use DreamboxEdit (Dreamset not work) and Service ID must be in Decimal (not in HEX).
Adding the new stream link to your channel list with DreamBoxEdit:
1. Go to the list in the middle "Bouquet details".
2. Right click on a channel, select "IPTV and other streaming services", select "Add".
3. Select "DVB/TS".
4. Choose a name and use the new stream link as URL.
5. Use the "Service ID" of the original channel. You can find it in the left list ("Services").
6. Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link. Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
7. Set Service Type to "1", and enter the correct Service ID for the channel.
Note:
• For best performance, the "Include ECM in http streams" setting must be enabled. If your image supports it (openpli, openatv), you can find it here: OpenWebif -> Settings -> Customize
• If the setting is not available, you may need to adjust the "ECM fix delay" setting in oscam webif (Config -> Stream Relay). Increase/Lower it until there is no stuttering.
Keys:
Keys are put into SoftCam.Key, which is placed inside the same folder oscam.conf is (for example /etc/tuxbox/config).
A sample SoftCam.Key file is provided in package with Asiasat 7 (105.5 East) keys.
Key format in SoftCam.Key:
P <srvid> <nb> <key>
Example:
P 1234 01 11223344556677
Important:
For keys Service ID (SID) must be in hex format. If Service ID start with 0, delete it and write it at end of Service ID (for 0A28 put A280, for 1234 put 2341, for 5678 put 6785).
If you like it, press thanks.
engineerkhan15
