Need help for dual lnb

[moonji54]

Dear All,
I want to fix dishtv sd and hd together with single dish and dedicated tuner without any diseqC switch. i have Starsat hyper 2000 hd. i want to know is it possible to get sd and hd together in hyper2000 with single cable.

[Chacha]

I want to fix dishtv sd and hd together with single dish and dedicated tuner without any diseqC switch. i have Starsat hyper 2000 hd. i want to know is it possible to get sd and hd together in hyper2000 with single cable

I'm not a hyper user ,have read that this box's Gshare supports HD channels on 100.5*e only where as you are interested in 95*e as well then there is no scope to access 2 sats without using DiSEqC switch.

[moonji54]

My Dear Chachi420, actually if we try with monoblock lnb will this work?

[crazyindianstranger]

Dear All,
I want to fix dishtv sd and hd together with single dish and dedicated tuner without any diseqC switch. i have Starsat hyper 2000 hd. i want to know is it possible to get sd and hd together in hyper2000 with single cable.

Yes, Monoblock LNB works for dishtv 95 E SD channels & 100.5 E HD channels without any diseqc switch over a single cable & dish antenna.

[moonji54]

than how i will scan need blind scan or manually add TP

[crazyindianstranger]

than how i will scan need blind scan or manually add TP

Depends upon box, Blind scan 'll work or u can enter TP details manually.

Actually, a single output monoblock LNB has in built diseqc switch. It is configured in box as diseqc mode as port 1/A for one satellite & port 2/B for the other satellite.

Some Monoblock LNB's have two outputs for each satellite, there we need an external diseqc switch.
But its preferred to buy a single output Monoblock LNB.

Hope, your confusion is clear now...

[moonji54]

ok all right, but my confusion is do i need to scan 95e and 100e separately or with single scan it will catch both

[crazyindianstranger]

ok all right, but my confusion is do i need to scan 95e and 100e separately or with single scan it will catch both

See, it depends upon your box model. Both the satellites 'll appear as separate satellites in your box.
U can use multi satellite scan mode to scan both satellites at once or can scan each satellites individually.

[crazyindianstranger]

Moreover, you can assume a monoblock LNB installation as having installed two separate dishes, pointed towards different satellites & connected through a diseqc switch via a single cable to your receiver.