ncam &multics install in dm500s

[pk_safeer]

Dear brothers ,Mein ny multics&ncam install ki hain dm500s mein 2no teekh kam kr rahe hain jub mein receiver restart kerta hun ncam tu kud bakud chl jati hai per multics ko command dy kr chlna perta hai telnet mein type krna perta multics -b koi information hu share krn plz

[chowdary]

Dear aap konsa image chalare ho.
mera pass E2 stb with openatv mai teek working hai.
multics r77 with ncam1.4 dono ok hai.
aap multics script file add kia ha.
etc/multics.emu

script:
emuname = multics
binname = multics
startcam = /usr/bin/multics -C /usr/keys/multics.cfg -b
stopcam = killall -9 multics

[pk_safeer]

Gp ka img hai Aur E1 hai apny jo script deya hai ye kon ci file hai sh file hai ya emu file hai

[saad]

yes hota ha ncam aur miultics auto start dm500s

[pk_safeer]

plz correct it where i am wrong



#!/bin/sh
########################################
# camid #
# 0000 = Commom Interface #
# 0001->0199 = for User Experiment #
# 0199 = Dccamd #
# 0200->0299 = Fbiss #
# 0300->0399 = Camd3 #
# 0400->0499 = Camx #
# 0500->0599 = Camx-Radegast-CS #
# 0600->0699 = Evocamd -OLD #
# 0700->0799 = Evocamd_ronlad_cs -OLD #
# 0800->0899 = Mgcamd -OLD #
# 0900->0999 = Mgcamd_ronald_cs -OLD #
# 1000->1099 = Newcamd -OLD #
# 1100->1199 = Newcamd-ronald_CS -OLD #
# 1200->1299 = Newcamd-spider -OLD #
# 1300->1399 = Radegast #
# 1400->1499 = Ronald-CS #
# 1500->1599 = Scam #
# 1600->1699 = Scam-Ronald-CS #
# 1700->1799 = OSCam #
# 1800->1899 = NewCS #
# 2000->2099 = Camd3 #
# 2300->2399 = Camd3-NewCS #
# 2600->2699 = Camd3-MPCardserver #
# 3000->3099 = Evocamd #
# 3100->3199 = Evocamd-Ronald-CS #
# 3200->3299 = Evocamd-NewCS #
# 3300->3399 = Evocamd-MPCardserver #
# 4000->4099 = Mgcamd #
# 4100->4199 = Mgcamd-Ronald-CS #
# 4200->4299 = Mgcamd-NewCS #
# 4300->4399 = Mgcamd-OSCam #
# 5000->5099 = Newcamd-Betad #
# 5100->5199 = Newcamd-Cardserver #
# 5200->5299 = Newcamd-Spider #
# 5300->5399 = Newcamd-NewCS #
# 5400->5499 = Newcamd-OSCam #
# 5500->5599 = OpenCam #
# 5600->5699 = RqCamd #
# 6000->6099 = CCcam #
# 6100->6199 = CCcam-Capmtserver #
# 6200->6299 = CCcam-NewCS #
# 6300->6399 = CCcam-OSCam #
# 9500->9599 = reserved #
# 9600->9699 = reserved #
# 9700->9799 = reserved #
# 9800->9899 = reserved #
# 9900->9999 = reserved #
########################################

CAMNAME="ncam&multics"
USERNAME=""
ZAPTIME=6
CAMID=1797
DVBSET=0
INFOFILE="ecm.info"
INFOFILELINES=
# end

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/var/bin/multics -b
sleep 10
/var/bin/ncam &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
kill `pidof `
killall -9 ncam 2>/dev/null
sleep 2
killall -9 multics 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac

exit 0

[chowdary]

Gp ka img hai Aur E1 hai apny jo script deya hai ye kon ci file hai sh file hai ya emu file hai

emu file ha.

[M.rashid]

Dear ap rc.local files add karo etc main auto hojaye ga

[pk_safeer]

ubuntu mein ho jati hai auto start dreambox mein nhi ho rahe hai