Very Strange 11483 H 44995 Videocon NO signal

[maxy1]

Guy's I have very strange issue with 88E Videocon. I have T8 High class receiver and for the TP 11483 H 44995 It takes time to lock the TP and After TP is locked I can see the signal levl 63% Then I gave a TP Scan however its not finding any channels. All the other TPs ok working good.

[lord]

are you receiving 11483 V 44995? if yes, can you please share the signals (quality)

[FARRUKH]

your lnb freq is wrong for ku. its not 9750/10750. correct lnb freq is 9750/10600

[kashif s]

All ok full signal

[maxy1]

Hi, Ok I have put the LNB as universal/ That didn't help. For TP V I have 64% Signal Quality. I just did few tests and found that I have to change the symbol rate to 44999 to get it work. Now its showing 64% Signal Quality for the 11483 H as well. I found the same issue with 76.5E KU 11167 V DVB-S
SR 45000 TP as well. So what I did was change the symbol rate to 44999. After that signal appears. Is there any known symbol rate issue with Tiger T8 Highclass ?

[FARRUKH]

Hi, Ok I have put the LNB as universal/ That didn't help. For TP V I have 64% Signal Quality. I just did few tests and found that I have to change the symbol rate to 44999 to get it work. Now its showing 64% Signal Quality for the 11483 H as well. I found the same issue with 76.5E KU 11167 V DVB-S
SR 45000 TP as well. So what I did was change the symbol rate to 44999. After that signal appears. Is there any known symbol rate issue with Tiger T8 Highclass ?

some boxes auto scan the d2h tps symbol rate as 45000. some scan exact 44995. symbol rate is not the issue. if tp hv signal. it shows it. symbol rate minor change is not the issue. you need to increase the signal of the tp 11483 with V polarity as i know. this tp is weaker than other tps on d2h. so u have to increase V polarity to get signal on H. increase it by atleast 70% by setting up your lnb distance and angle.