Umair Malik wrote: ↑15 Dec 2017, 6:50 pm
[I Did The Following Trick
-I Installed V2.12 First Of All
-After That did A Factory Default (All)
-After Doing The Factory Default I Instantly Tuned Dish TV HD (Need To Check Whether Forever Server Is Active Or Not)
-If Dish TV HD Is Now Not Doing Signal Loss And Opens In 15 Sec Then You Are Good To Go (In My Case I Had To Do That 3 Times)
-If It Stil Does Signal Loss Issue Then You Will Have To Keep On Doing The Procedure Until Signal Loss Hasn't Disappeared
Dear Umair Bhai,
I am currently running V2.09 on my Extereme and having too much freezing issues on both Dishtv HD and SD and signal loss on HD only, so to fix this every time i need to go to antenna setting , while Hotbird works without any issues, I am not an expert and not have enough knowledge of software installation on receiver, so before trying the above and not to brick my receiver i need some understanding in layman language to do the successful installation to avoid signal loss issue on DishtvHD and freezing issue on both HD and SD.
1- should i install V2.12 or V2.10 as going through all the posts i am a bit confused and is there any site from where i can get the software.
2- details method how to install the downloaded ZIP file into receiver. if possible a pictorial / screenshot showing step by step method for a rookie like me and many others with thanks in advance.
3- if we do the factory reset after updating the software to V2.12 will it not delete the newly installed V2.12 and channel data so it means we need to reinstall the new version again. is there any problem to receiver if we factory reset like loss of company server or Appollo IPTV or reduction in server validity.
4- after doing the reset which satellite we need to tune in first should it be dishtv Hd or any one.
I shall be great-full for your guidance bro !
Muhammad Asif
1.Before Doing That Trick With V2.12 I Was Also On V2.09 I Had To Also Do That Thing Of Going Into Installation Menu.
2.You Should Install V2.12 In My Honest Opinion Its The Best SW So Far For Starsat 2000 Extreme
You Can Download It From Here Click Here To Download
3.You Will Just Need To Extract This Software In To The USB And Just Open It By Going In To USB Menu
4.After Installing Version 2.12 You Will Need To Factory Default The Receiver Choose (All) In Factory Default Menu The Password Is 0000. And After That See Your Internet And Then Go To Server Settings And See Whether Forever Server Is Connected Or Not (Press 3 If You Dont Find It In 40 Number Server)After That You Will Have To Tune Dish TV HD If It Doesn't Have Signal Loss Issue And Opens In 20 Sec With No Freezing Thrn You Are Good To Go. Otherwise You Will Have To Repeat This Procedure Again And Again (No Need To Install V2.12 Again Just Factory Default) Until Signal Loss Issue Hasn't Departed.
4. Your Forever Server And IPTV Ending Date Will Remain Same As Your IPTV And Server Validity Is Stored In Serial Number Of Your Receiver I Have Done Multiple SW V2.11/10/09/01 To Find One That Doesnt Have Freezing Issue But This Tricked Has Solved My Issues
Thanks Umair Bhai , your above advise works ...HD works like charm and no signal loss from SD to HD , the only problem im am facing now is the time between 2 HD channel , it took 40 sec to switch from one HD channel to another and in between the screen of "scrambled channel" appears which is really painful but once opened there will be no freezing, whereas SD is still freezing but the time between two channels is 15 sec. only Hotbird works like FTA with no lag in between channels..
In Apollo IPTV some 720P HD channels have lip sing problem as picture and voice dont matches
Is there any solution to
1- little free still with SD channels.
2- time lag between 2 HD channels
3- audio and video matches with each other in Apollo
..
masifh wrote: ↑19 Dec 2017, 10:48 pm
Is there any solution to
1- little free still with SD channels.
2- time lag between 2 HD channels
3- audio and video matches with each other in Apollo
..
1)I Am Also Facing Little Freezing On Dish TV SD 95E,Eutelsat 9E But This Is Fault In Forever Server My Friend Has Tiger T8 High Class (Tiger T8 High Class Also Has Same Company Server Forever 121 Like Starsat 2000 Extreme) On Tiger T8 High Class Dish TV SD Also Has Same Freezing Issues. Hoping Soon Forever Server Might Fix This 95E Freezing Issue. By The Way If You Still Want To Watch Dish TV SD Freez Free U Can Use Local Dish TV Cline But You Will Have To Close/Disable Forever Server (As The Receiver's First Priority Is Forever Server)
2)There Indeed Is Time Lag Between Two HD Channels You Can't Do Any Thing In This Its Purely Server Side Thing And I Assume This Won't Be Fixed
3)I Haven't Checked Apollo IPTV In Recent Time Due To Bussy Schedule Will Check And Let You Know About Its Performance On My Side
Starsat 2000 Extreme HD
Starsat 2000 Hyper HD Sony KD49X8500B Shabir 8-Feet Motorized (With Auto Positioner)
Coverage:-115E To 3.1E Fixed=105E(C),95E+93.5E(KU),91.5E(C),38.5E(C+KU),26E(KU),13E(KU),9E(KU)
awan71 wrote: ↑20 Dec 2017, 9:59 pm
does this receiver star sat 2000 exterme has open webif or like this operation to get screen shot or configure from computer
awan71 wrote: ↑20 Dec 2017, 9:59 pm
does this receiver star sat 2000 exterme has open webif or like this operation to get screen shot or configure from computer
Nothing because this is NonLinux box if you want make screen shot of chanels use gm screen app
awan71 wrote: ↑20 Dec 2017, 9:59 pm
does this receiver star sat 2000 exterme has open webif or like this operation to get screen shot or configure from computer
Nothing because this is NonLinux box if you want make screen shot of chanels use gm screen app
awan71 wrote: ↑20 Dec 2017, 9:59 pm
does this receiver star sat 2000 exterme has open webif or like this operation to get screen shot or configure from computer
Nothing because this is NonLinux box if you want make screen shot of chanels use gm screen app
