mera receiver on krte hi time le aata hai 00:00 and just counting time ki krta rehta hai sb method apply kiye but sahi ni ho raha na hi force ka option aata na hi display even k boot tk ni ho raha
please any one help
startrack 2020 hd plus stuck on timer no display
- irfan baloch
- Registered Member
- Posts: 252
- Joined: 03 Jul 2013, 4:04 pm
-
- Senior Registered Member
- Posts: 711
- Joined: 04 Aug 2013, 4:42 pm
- Location: peshawar
- Has thanked: 9 times
- Been thanked: 27 times
Re: startrack 2020 hd plus stuck on timer no display
recovry image sa recover karooirfan baloch wrote: ↑04 Sep 2022, 10:10 am mera receiver on krte hi time le aata hai 00:00 and just counting time ki krta rehta hai sb method apply kiye but sahi ni ho raha na hi force ka option aata na hi display even k boot tk ni ho raha
please any one help
- irfan baloch
- Registered Member
- Posts: 252
- Joined: 03 Jul 2013, 4:04 pm
Re: startrack 2020 hd plus stuck on timer no display
sir can you please explain how can I do this
STAR TRACK 2020 HD PLU
-
- Senior Registered Member
- Posts: 711
- Joined: 04 Aug 2013, 4:42 pm
- Location: peshawar
- Has thanked: 9 times
- Been thanked: 27 times
Re: startrack 2020 hd plus stuck on timer no display
Method of passing the rescue-image for Spark devices using Cisco TFTP Server
We connect the computer with the receiver with a regular Ethernet network cord
Then we enter the network settings into the computer
Control Panel \ Network Connections
Click properties
Then click properties on the option as
internet protocol version 4(tcpi/ipv4)
Enter the IP address as then ok
192.168.40.19
We put the rescue-image files without compression inside a spark folder in a specific path on a computer for example on a desktop If the receiver had stopped and it was working on the Soft spark
if he had stopped and it was on the enigma2, we would do the following
Instead of writing the name of the spark file, we will call it enigma2 and the file will also be directly in the Paragon as we mentioned before
This trick can work But the basic principle is that the server is the Spark system
now run the attach file
We delete the correct signs and choose the path of the spark file by clicking browse, then ok, and then we close the program For example, depending on the situation in which the receiver is located, as mentioned above
C: Desktop / spark
or
C: Desktop / enigma2
Then we close the program
We run the receiver in a Spark mode
And press ok until forc appears
Then we run the program again and do not press anything
Then the program automatically sends the first repair file to the device
Then the second
We wait until the download is finished and the word succ appears on the receiver and then booting
all done
download your chip verion from https://www.satdl.com/ site 7162 or 7111 whatever your box is ok
- Cisco TFTP Server.rar
- (521.58 KiB)
- irfan baloch
- Registered Member
- Posts: 252
- Joined: 03 Jul 2013, 4:04 pm
Re: startrack 2020 hd plus stuck on timer no display
dear ye try kya ha . per force pe recevr ata he ni
wo timer he aata ha
wo timer he aata ha
STAR TRACK 2020 HD PLU
-
- Senior Registered Member
- Posts: 711
- Joined: 04 Aug 2013, 4:42 pm
- Location: peshawar
- Has thanked: 9 times
- Been thanked: 27 times
Re: startrack 2020 hd plus stuck on timer no display
proper connect karoo phir ho gairfan baloch wrote: ↑04 Sep 2022, 6:55 pm dear ye try kya ha . per force pe recevr ata he ni
wo timer he aata ha
Who is online
Users browsing this forum: Claude and 3 guests