Yar ndguet waulkee ye kia hai.... agar ho sake to urdu me upload karo... q ke is me ziada tar words ki samaj ni ati like nlahz ndguet ...m_saleeM wrote:A period not to exceed two minutes
has been the problem of the brothers addressed the problem was resolved in a period of 15 minutes by the rescue file but Many times the process does not succeed and remain stuck in the machine, despite talking about Akamaleh process successfully
solution experimenter surest
Normal flash ....... 2 ....... 3 3 2 5 5 ........ 2 -melv Alboot u-boot 131-11
download
http://www.2shared.com/file/w3gAfeHa/u-boot_131-11.html" onclick="window.open(this.href);return false;
3-Loader , a Heber Tarminal program HyperTerminal
download
http://www.hilgraeve.com/hyperterminal/" onclick="window.open(this.href);return false;
way:
First, you must modify the loader data are as follows:
1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
now connect the receiver to your computer by cable and get back to the receiver Secondly, must do the following to the receiver reads Loader
-nhal Receiver from behind and be Dhagtin on Waukee interface receiver
-bad 5 seconds note the word [Forc] device interface
-ndguet Waukee button left Left
-nlahz receiver interface wrote LOAD and the loader computer worked its pipeline progress
the process ends in two minutes and stays bot but when installing TV note Almino has appeared
Process:
We Option B of the box to select Transfer / File Transfer
and choose which of his boot file attachments u-boot.bin
then choose finally send file
And do not forget the pressure on Spas Bucky board computer button to activate the loader
waiting.....
