Spark on problem startrack2020hd plus chip7162

[talibb]

:salam2:
dosr method rescue image computer ethernet with settings ip192.168.40.19 or 192.168.50.28 in my network local area connection=propertis=internet protocol TCP/IP and select following ip address apply and save
and tool of ugrade
Upgrade rescure spark by tftp:
Upgrade Step: 1.copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
2.select folder in TFTP tools:
3.Keep Pressing [OK] Button in Front Panel, then power on STB.
4.After 5 seconds you will see [Forc] in LED, release [OK] button and press

Button.
5.If everything OK, You will see [T LD] shining in LED
and you will see some debug information in TFTP Server,
like “Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary mode Mon Oct 25 14:03:33 2010: Successful.”
6.if upgrade success, You will see [SUCC] and STB reboot automatically If upgrade not finishes in 5 minutes,
then there must be something wrong, please check your configuration and re-try.
computer ethernet loader download
http://www.4shared.com/rar/Fg6DZolFba/r ... tpd32.html" onclick="window.open(this.href);return false;
softwear rescue 7162 chip startrack2020 hd plus
http://www.4shared.com/zip/2HfmRQDS/spa ... oblem.html" onclick="window.open(this.href);return false;?
bhai aiup linux usb say bhee kar sakitay hoo
mostly 3.0 usb latest
these models are also ok
1=kindstone dtse109
2=dt 109
usb must be linux supported
aiup ntfs say usb formate karoo ise tool say
http://www.4shared.com/rar/4m-cV2cEba/H ... rmate.html" onclick="window.open(this.href);return false;?

[Nasiriqbal]

:salam2:
dosr method rescue image computer ethernet with settings ip192.168.40.19 or 192.168.50.28 in my network local area connection=propertis=internet protocol TCP/IP and select following ip address apply and save
and tool of ugrade
Upgrade rescure spark by tftp:
Upgrade Step: 1.copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
2.select folder in TFTP tools:
3.Keep Pressing [OK] Button in Front Panel, then power on STB.
4.After 5 seconds you will see [Forc] in LED, release [OK] button and press

Button.
5.If everything OK, You will see [T LD] shining in LED
and you will see some debug information in TFTP Server,
like “Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary mode Mon Oct 25 14:03:33 2010: Successful.”
6.if upgrade success, You will see [SUCC] and STB reboot automatically If upgrade not finishes in 5 minutes,
then there must be something wrong, please check your configuration and re-try.
computer ethernet loader download
http://www.4shared.com/rar/Fg6DZolFba/r ... tpd32.html" onclick="window.open(this.href);return false;
softwear rescue 7162 chip startrack2020 hd plus
http://www.4shared.com/zip/2HfmRQDS/spa ... oblem.html" onclick="window.open(this.href);return false;?
bhai aiup linux usb say bhee kar sakitay hoo
mostly 3.0 usb latest
these models are also ok
1=kindstone dtse109
2=dt 109
usb must be linux supported
aiup ntfs say usb formate karoo ise tool say
http://www.4shared.com/rar/4m-cV2cEba/H ... rmate.html" onclick="window.open(this.href);return false;?

[talibb]

bhai aiup
computer windows min hyper terminal bnaio
all method kay bad naheen hota toi ye karoo
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recever ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr80000000
PDK7105>saveab usb ya tftd32 say rescue karoo