Enigma2 Dreambox & VU+ Files Discussions and Solutions

[Aliraza63]

VU+SOLO2 & SE Russian Dream Media Center Edition






http://www.speedyshare.com/J6m2S/rudrea ... se-usb.zip" onclick="window.open(this.href);return false;
http://www.speedyshare.com/Mzug9/rudrea ... o2-usb.zip" onclick="window.open(this.href);return false;

Thanks to Jess for providing me the link and updates.

[taree]

trying since evening to work mgcamd with newnigma2 but no trick is working.
downloaded 1.38 and also older version from nn2 feed.
but dont know why mgcamd not opening any channel..
may be some editing is needed in mg-cfg
i m using newcamd line from Avril Lavigne
here is my mg-cfg
---------------------------

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[Aliraza63]

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

It should be
G: { 32 }

[Masood]

@Aliraza
In post #92 the image can be installed in SIM 2.10 ?

[Aliraza63]

@Aliraza
In post #92 the image can be installed in SIM 2.10 ?

No its for Vu solo 2 and Se .. these are hi profile images dm cant handle this

[taree]

It should be
G: { 32 }

but i m not using cline .as i told u it is nline.
g should be 01 according to instructions.

[Aliraza63]

but i m not using cline .as i told u it is nline.

yehan Golden ki opinion lein . i cant say anything

[Aliraza63]

BlackHole-2.1.5-05-02-2015-DM800se SIM2.10

02/05/2015:

*Skin Default: New Small and Fast Skin Beyonce F1

*ChannelSelection: Fixed go to CurrentService For

-All services
-Satellites
-Provider

*BlackholeAddons Upadated:

-ADD skin armycurvehd
-ADD skin armyghosthd
-ADD skin ghostblackhd
-ADD skin briostdhd
-ADD skin dreamy
-ADD skin rihanna6
-ADD skin rihanna7
-ADD skin rihanna8
-ADD skin factory10
-ADD Plugin IptvList Updater






http://www.mediafire.com/download/1yk4y ... iMAHER.rar" onclick="window.open(this.href);return false;

[Aliraza63]

Eurosat-1.1-dm800se-SIM2.10 20150502


Euro-Sat-Image "BETA"
New Images EuroSat 1.1 " Base Oe-Alliance
THE FW NOT CONTAIN k@yS OR EMULATORS OF ANY KIND.
EUROSAT IS NOT RESPONSIBLE IN ANY CASE FOR WHAT THE USERS WILL OF THESE PROGRAMS.
Thanks to Alliance and all their Coder
Images





http://www.mediafire.com/download/fg809 ... stende.nfi" onclick="window.open(this.href);return false;
https://www.sendspace.com/file/m6ktyj" onclick="window.open(this.href);return false;

Thanks to Jess for providing me link and updates

[Aliraza63]

Newnigma2-black-eB-sim2-dm800se

2015-04-16

- MetrixHD
- MyMetrix
- MediaPortal 6.9.2
- Mediainfo 2.6
- Sichern & Flashen
- Livestreamer
- Newnigma2-v.4.0.12
- IPTV List Updater
- EMC





http://workupload.com/file/QDUACKBa" onclick="window.open(this.href);return false;

Thanks to Elibindo for updates