Enigma2 Dreambox & VU+ Files Discussions and Solutions

[Aliraza63]

I just got a thought of virus in BIOS ,,thatswhy I suggested to use optiflasher.

when u upload any new and clean image . actually it overwrite the image it has already in nand . so the simple bug of firmware can be removed after uplaoding new image . But if the bug has made the nest in flash then u cant full erase the whole flash . How u will erase the enigma batch files in flash ? Optiflasher can fix the bug or can hide the portion that contains bug but cant format the flash to remove bug .. and one thing should be in notice (that once yassinova told some where ) Optiflasher 's improper use can kill the nand flash also ..

[shaayan]

masood bhai sorry not succeeded to see any channel, still same problem in this image also,looks there hardware issue. any how for providing your backup.

did you change the desiqc setting as mine differs ,,and the information you posted is almost same as mine only production date is not same or mac add ,serial no.

BRO I HAVE CHECKED THROUGH STRAIGHT CABLE.SO THERE IS NO NEED TO CHANGE DISEQ SWITCH.

[shaayan]

shaayan didn't clear his point by providing this issue's background ..how and when it happened ,Cross checked the DiSEqC switch ,coaxial cable etc.?
till he provides whole info ,hard to trace issue.
I just got a thought of virus in BIOS ,,thatswhy I suggested to use optiflasher.
anyhow I have a little experience in front of you.

MASOOD BROTHER ACTUALLY I HAVE PURCHASED THIS BOX FROM MR FURRUKH,I WAS CONFIDENT TO MAINTAIN THAT BOX BUT NOT SUCCEEDED.

[shaayan]

sorry dear, i am still un able to scan any channel, how ever i have changed the image but result is same. is there any other idea ?

its can be a module driver issue also..
1. updload ssl > dont reboot > then image upload >dont reboot > send ssl again > now reboot
if it doesnt work
then use dcc or vcc update the driver reboot
check now

ALIRAZA BHAI FRIST STEP I HAVE COMPLETED ,BUT NOT WORKS,PLS TELL ME ABOUT SECOND STEP. HOW CAN I UPDATE DRIVER THROUGH DCC.

[Aliraza63]

MASOOD BROTHER ACTUALLY I HAVE PURCHASED THIS BOX FROM MR FURRUKH,I WAS CONFIDENT TO MAINTAIN THAT BOX BUT NOT SUCCEEDED.

This box is already declared damage box. number of post available here .I dont think so i can help by posts. The machine is not infront of my eyes I cant say anything .Sorry

[Aliraza63]

sorry dear, i am still un able to scan any channel, how ever i have changed the image but result is same. is there any other idea ?

its can be a module driver issue also..
1. updload ssl > dont reboot > then image upload >dont reboot > send ssl again > now reboot
if it doesnt work
then use dcc or vcc update the driver reboot
check now

ALIRAZA BHAI FRIST STEP I HAVE COMPLETED ,BUT NOT WORKS,PLS TELL ME ABOUT SECOND STEP. HOW CAN I UPDATE DRIVER THROUGH DCC.

Now its cleared where the problem is .. no need to update or replace drivers it will not effect anymore .it needs a detail test . if u have technical knowledge i have posted its daigramm and tuner daigram also .. check step by step thoroughly measure the volts .its must have seriouse damage in board not in tuner I think

[shaayan]

MASOOD BROTHER ACTUALLY I HAVE PURCHASED THIS BOX FROM MR FURRUKH,I WAS CONFIDENT TO MAINTAIN THAT BOX BUT NOT SUCCEEDED.

This box is already declared damage box. number of post available here .I dont think so i can help by posts. The machine is not infront of my eyes I cant say anything .Sorry

aliraza bhai,if u agreed then i will sent this box towards u, i will pay the whole charges of maintenance, send me ur cell no for further,

[Aliraza63]

Main try karta hon .. Ap kehan se belong karty hain ?

[shaayan]

Main try karta hon .Ap kehan se belong karty hain ?.

bro me lives at gujranwala

[Aliraza63]

SWE TEAM-v.5-IPTV-READY-0E2.0 DM800se-SIM2.10

Updated Gstreamer for SIM2
Update lib and pyo files for IPTV SIM2





Thanks to Rami-mahar for this Job

http://www.mediafire.com/download/r44f1 ... iMAHER.rar" onclick="window.open(this.href);return false;