How to Upgrade Spark Uboot by RS232 via Hyperterminal+SS

[Dr.Timor]

Preparation:
1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]

2. Select [Transfer/File Transfer] Option

3. Select [u-boot.bin] and use [Ymodem] Option, send file

Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, then power on STB.
2. After 5 seconds you will see [Forc] in LED, release [OK] button and press

Button.
3. If everything is ok, in STB you will see [LOAD] shinning in LED. In HyperTerminal, you will
see:

Download Hyperterminal Application : http://rghost.net/8yLxJybf4" onclick="window.open(this.href);return false;

[Nasiriqbal]

very good sharring

[asmatorakzai]

Good work . thanks

[jansagar]

GOOD SHARING KEEP IT UP

[Ghani8856]

Good work . thanks

[sanjaykl]

Bhai uboot kahan se download karoon

[Dr.Timor]

Bhai uboot kahan se download karoon

yaha se : http://www.4shared.com/zip/2HfmRQDS/spa ... oblem.html" onclick="window.open(this.href);return false;

[M.rashid]

bro your good work thanks to info

[Dr.Timor]

Download Hyperterminal : https://www.hilgraeve.com/support/htpe7.exe" onclick="window.open(this.href);return false;

[jahan25]

Timor bhai is main konsi file load karo mean rescue-image ki or yah Window be nai a rahi hai...Thnx