SRT-2014HDPlatinum and its All Clones Files

[+PAKISTANI+]

yeh aap mujhay pukka ker rehay hein ya mera dill kutcha ker rehay hein.

app ka dil kacha hoga tabi 2 app pakkay hoon gain

[Masood]

the current DiSEqC switch which is in my use ,is an old model which was rejected by me many years b4(didn't remember why it was rejected) working perfectly since last 10 days ...still I'm not sure ....yeh kitni dair nikaalta hay.
Iss say pehlay switches (which are available in Rs.100)try kyyay thay.

[Masood]

yaar ye box kaisa chal reha hai ? Main sochta hon agar is ko Full Enigma Open pli main Convert kar dein to kehan tak maar kar sakta hai ? DM 800 Pro ke aas pass ya kuch thora sa agay. ? Ya 2020 Jaisa.. Thinking

@Rana G!!!
Dukhti rug tay pawoon rukh ditta ee zalma
Till Sunray comes lets start chair khaani with this box.
by the way since you updated it with clone s/w its performance and video quality got better

[Aliraza63]

Hahahah

Main H/M se baat karon ga ye project shuroo us ne kia tha .. khatam main ne kia tha .

[Masood]

@Rana G!!!
Few days earlier I was facing a strange issue with my DiSEqC switches ,did you read those? One SAT out of 3 used to loose signals .
Since I replaced a DiSEqC switch of classic model ,no issue occurred.
Asif Ali suggested to replace the clone s/w ,,,yaad hay ?

[Aliraza63]

@Rana G!!!
Few days earlier I was facing a strange issue with my DiSEqC switches ,did you read those? One SAT out of 3 used to loose signals .
Since I replaced a DiSEqC switch of classic model ,no issue occurred.
Asif Ali suggested to replace the clone s/w ,,,yaad hay ?

I didnt saw that posts . clone sw doesnt have that kind problem if it clashes some where it will act like these :
1. No signal even at single cable
2. Signal shows but doest store it
3. Showing Transponder list but will not scan it
4. Store the signal but only audio is working or only video is working
5. Invalid Lan or Invalid Mac Address error
6. Contineous booting
7. Stuck @ ON
8. Stuck @ BOOT
9. Remote keys Works opposite ways. channel keys work for vol and vol keys works for channel.
10. Error Code @ Display Pannele like , Error 10, Error 62 , Error 32 etc etc
nothing will act more strange then mentioned over .
I know A to Z of this class and can work on it to .My fortis Nanno is the biggest example that I have not only made it complete Enigma 2 Open Pli Box but its also working as daul boot . when ever need I can switch it back to factory image from my remote . But its my bad taste I dont waste my time to old boxes now.

[Chacha]

Rana G!!! last day I was watching See TV (Alif drama) at Paksat ,suddenly picture got frozen ,,,,,,(mostly airplanes take off or landing time signals go down and picture freezes for one or two seconds)
but the issue was not that ,box was hung up ,,,I unplug its adopter to restart ,,,,while booting on loader screen box hung up ,,restarted once again by unplugging power. after attempting 4 trials the box started working normally on same channel but hanged once again after 2,3 minutes ....I did the same phenomena and after booting successfully I changed the channel and it was okay.
then I toggled channels and it was working fine on every channel.,,,,samaj naheen aa rehi issko kya huwwa tha .

[Aliraza63]

samaj naheen aa rehi issko kya huwwa tha .

Channel list delete karen aur factory reset karen aur new scan karen .us ke baad
setting main timeshift off karen aur epg auto ko manual karen ... epg data crash kar rha hai kisi jagha par