Startrack 2020 HD Plus Problem On Boot Stuck

[imranmustafa057]

hyperterminal computer windows per ye try karoo
rs232 port say
computer windows min hyper terminal bnaio
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recevier ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr 0*80000000
PDK7105>save
phir linux usb or nokia orignal memory card say rescue karoo


Report this post

[imranmustafa057]

dosr method rescue image computer ethernet with settings ip192.168.40.19 or 192.168.50.28 in my network local area connection=propertis=internet protocol TCP/IP and select following ip address apply and save
and tool of ugrade
Upgrade rescure spark by tftp:
Upgrade Step: 1.copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
2.select folder in TFTP tools:
3.Keep Pressing [OK] Button in Front Panel, then power on STB.
4.After 5 seconds you will see [Forc] in LED, release [OK] button and press [Right] Button.
5.If everything OK, You will see [T LD] shining in LED
and you will see some debug information in TFTP Server,
like “Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary mode Mon Oct 25 14:03:33 2010: Successful.”
6.if upgrade success, You will see [SUCC] and STB reboot automatically If upgrade not finishes in 5 minutes,
then there must be something wrong, please check your configuration and re-try.
computer ethernet loader download
http://www.4shared.com/rar/Fg6DZolFba/r" onclick="window.open(this.href);return false; ... tpd32.html
softwear rescue 7162 chip startrack2020 hd plus
http://www.4shared.com/zip/2HfmRQDS/spa" onclick="window.open(this.href);return false; ... oblem.html?
bhai aiup linux usb say bhee kar sakitay hoo
mostly 3.0 usb latest
these models are also ok
1=kindstone dtse109
2=dt 109
usb must be linux supported
aiup ntfs say usb formate karoo ise tool say
http://www.4shared.com/rar/4m-cV2cEba/H" onclick="window.open(this.href);return false; ... rmate.html?

[imranmustafa057]

aiup ye karoo
hyperterminal computer windows per ye try karoo
rs232 port say
computer windows min hyper terminal bnaio
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recevier ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr 0*80000000
PDK7105>save
phir linux usb or nokia orignal memory card say rescue karoo

[imranmustafa057]

resources/image/14089http" onclick="window.open(this.href);return false;:
//www.golden-forum.com/resources/image/14088

ye only one ip use karoo
192.168.40.19
agar phir bhee naheen ho to
upgrade recever RS232 port khareed karo
aur btaya huwa tareeqa computer say command lagaio

[imranmustafa057]

aiup ye karoo
hyperterminal computer windows per ye try karoo
rs232 port say
computer windows min hyper terminal bnaio
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recevier ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr 0*80000000
PDK7105>save
phir linux usb or nokia orignal memory card say rescue karoo

[imranmustafa057]

hyperterminal computer windows per ye try karoo
rs232 port say
computer windows min hyper terminal bnaio
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recevier ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr 0*80000000
PDK7105>save
phir linux usb or nokia orignal memory card say rescue karoo