VU+ UNO-4K Files For Iqbal Bhawna Isb.

[engineerkhan15]

The most important thing for me is to get biss working. Kindly guide me about it; the plugin required and its ipk version! Regards

Use constant.cw with Oscam Emu
constant.cw key format:
2600:000000:0001:0800:1FFF::B9 50 07 10 F0 06 53 49 B9 50 07 10 F0 06 53 49 ;IMG Asia (100.5E)
2600:000000:0003:0800:1FFF::48 60 04 AC 2E 83 8D 3E 48 60 04 AC 2E 83 8D 3E ;AFP Asia (100.5E)
2600:000000:0001:0BC2:1FFF::17 04 60 7B 41 97 37 0F 17 04 60 7B 41 97 37 0F ;Edge Sports (100.5E)

oscam server:
[reader]
label = constant.cw
protocol = constcw
device = /var/keys/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000000
group = 3

[taree]

try this one

blind-scan-test_1.0_all.rar

(670.16 KiB)

for biss use mgcmad 1.38 from vu-panel
plz mention which biss chanells u want to watch?
there must be some wrong with softcam.key
probably same sid issue as u r getting green from emulator.

[Aliraza63]

try this one

blind-scan-test_1.0_all.rar

for biss use mgcmad 1.38 from vu-panel
plz mention which biss chanells u want to watch?
there must be some wrong with softcam.key
probably same sid issue as u r getting green from emulator.

It will not work for UNO 4K (due to its diffrent architecture from mips to arm )

And it didnt as according to his message box is stuck at boot logo

Iqbal sahab

if u r able to connect box with dcc and have stable connection

then go to
usr/lib/enigma2/python/Plugin/extensions

and remove the Blindscan extension and reboot the box

and keep in mind Solo2 and Solo4k/uno4k 's architecture is much diffrent .
simply gui doesnt prove that runing architecure behind it is same .
so only use the plugins designd for 4k division

[bala240]

Thank you dear Ali Reza. Anyway, I have now installed open blackhole which is better than the standard blackhole image in my opinion. I am in the process of installing all the plugins. I will get back to the forum once I am finished with it. Can anybody send me constant.cw with the latest biss keys? As per Engineer Khan Sahib it will be more handy for biss feeds/channels. Regards,

[engineerkhan15]

Can anybody send me constant.cw with the latest biss keys?

You may prepare your own constant.cw file with your desired channels keys inside, as per following format:

CAID:ProvID:SID:PMT PID:ECM PID::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ; comments

For Biss:
CAID: 2600
ProvID: 000000
SID: 4 digits SID in hex format (if don't know then get from Oscsm Emu Webif live log)
PMT PID: 4 digits PMT PID in hex format (if don't know then get from Oscsm Emu Webif live log)
ECM PID: 1FFF
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx: key in hex format (twice)
comments: anything (preferably channel name for easy reference)

[taree]

Can anybody send me constant.cw with the latest biss keys

here is latest biss and constant.cw keys

DreamBox Keys _21-03-2017.zip

(110.23 KiB)

[Aliraza63]

Working files from My Solo 4

Config Oscam Ncam and Wicard

config.rar

(34.26 KiB)

Keys

keys.rar

(36.5 KiB)