is it possible. 95e,93.5e and 88e on monoblock lnb on 2 ft?

[Mohsin.m17]

hi every one is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb on 2 ft dish. plz experts reply.

[Umair Malik]

Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver

This Will Be Setting

Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E

Disqec 1.1
The Port On Which You Connected The LNB

*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch

[Mohsin.m17]

Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver

This Will Be Setting

Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E

Disqec 1.1
The Port On Which You Connected The LNB

*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch

thanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?

[OmMeE]

hi every one is it possible can i install 3 satellites on monoblock lnb like 95e, 93.5e and 88e on monoblock lnb on 2 ft dish. plz experts reply.

Yes it's quite possible. Set 88e first and then fine tune to dish and sun tv.

[Umair Malik]

Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver

This Will Be Setting

Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E

Disqec 1.1
The Port On Which You Connected The LNB

*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch

thanks dear but i am confused about diseq setting. you said 8 pin diseq will work for monoblock. so if i am using paksat and monoblock setup and for example i am connecting monoblock lnb to 2 no pin of diseq then what will be the setting in reciver. still i have to select diseq 1.0 (1 for 95+93, and 2 for 88)1.1 for and lnb 1 for paksat?

In Case If You Are Using 8 Pin Diseqc

This Will Be The Setting

Connect Paksat To( For Example )1st Port Of 8-Pin Diseqc And In Receiver Paksat's Diseqc Setting Will Be

Diseqc 1.1 LNB 1
Diseqc 1.0 = None

Similarly For Asiasat 7 It Will Be Connect Asiasat 7 To Port Number 8 Of 8-Pin Diseqc And In Receiver Asiasat 7 Diseqc Setting Will Be

Diseqc 1.1 LNB 8
Diseqc 1.0 = None

For Monoblock LNB Connect It To Port Number 2 Of 8-Pin Diseqc Switch And In Receiver Monoblock's Setting Will Be

For Dish TV,DD Free Dish,Sun HD 95E+93E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 1

For Videocon D2H 88E
Diseqc 1.1 LNB 2
Diseqc 1.0 LNB 2

[Mohsin.m17]

thanks umair bhai now i understand all the settings

[knightrider]

Yes It Is Possible But You Will Need 8 Pin Diseqc Switch For Monoblock LNB To Work On Your Receiver

This Will Be Setting

Diseqc 1.0
LNB 1= 95E+93.5E
LNB 2= 88E

Disqec 1.1
The Port On Which You Connected The LNB

*Monoblock LNB Doesnt Work On 4 Pin Diseqc Switch

Its possible bro 4 pin diseqc switch surly works but you need 2 way splitter and 4 pin diseqc switch,in receiver settings just use lnb 1 for dishtv 95e and 93.5e and lnb 2 for videocon 88e. And lnb 3 for 3rd lnb just see below picture i am using it also this way

[sarfraaz184]

enigma2 recevers pe diseq or spliter ki zaroort nhein hoti monoblock main 1.1 diseq bilt in hota hai

[azkar_pk]

no need any switch only Burst B for 93/95E and burst A use for 88E.
like old dish tv HD 100.5E and 95E setting, only rotate your lnb from up side to downward.
[attachment=0]WP_20180502_21_19_12_Pro.jpg[/attachment]

[knightrider]

no need any switch only Burst B for 93/95E and burst A use for 88E.
like old dish tv HD 100.5E and 95E setting, only rotate your lnb from up side to downward.
WP_20180502_21_19_12_Pro.jpg

Bhai uss ki post parho woh keh rha hei ke monoblock lnb ke sath 3rd sat bhi chalana hei uss ke liye disqec switch aur power pass ki zarorat hoti hei