Oscam Vs Wicardd reader/proxie connection time

crazyindianstranger
Senior Registered Member
Senior Registered Member
Posts: 897
Joined: 11 Nov 2014, 11:51 am
Location: India
Been thanked: 1 time

Oscam Vs Wicardd reader/proxie connection time

Post by crazyindianstranger »

Hi Friends,

I m testing/using both these emulators/softcams from the last few days.

I found that Wicardd connects immediately to the readers/proxies after system restart or emu restart.
In short it starts decoding channels immediately after restarts.

But, When using Oscam as client,

it takes too much time to connect to newcamd based proxies (sometimes approx. 5 minutes) after the power failure or system restart commands.

whereas,

cccam based proxies are connected immediately with the server & starts decoding channels immediately.

I ve tried various reader options, the issue is still same. (Newcamd takes time, & cccam based proxies connects immediately)

Have anybody found this issue & is there any solution/fix for this, or is there any setting at server side which is delaying connection attempts from the client side if using Oscam as client?
The real fun is in doing experiments, not in watching the crap programmes!!!!!
User avatar
suleman84
Gold Contributor
Gold Contributor
Posts: 1407
Joined: 16 Jun 2013, 9:45 pm
Location: █║▌█PAKISTAN█║▌█│
Has thanked: 63 times
Been thanked: 18 times

Re: Oscam Vs Wicardd reader/proxie connection time

Post by suleman84 »

:prescription: I Also Try To Wicard But Not Scuess
Not Working In My Box ..But Mgcamd is Working Fine..and Cccam Also Good Ecm For Channel Changing
Be Happy All The Time
User avatar
Golden
Vip
Vip
Posts: 4648
Joined: 14 Jun 2013, 6:00 am
Location: Pakistan
Has thanked: 1301 times
Been thanked: 671 times

Re: Oscam Vs Wicardd reader/proxie connection time

Post by Golden »

post your complete configurations along with all config files which you are using in oscam.
on my side oscam is having scratchless connection upon emulator restart or internet re-connect.
tell ver. details and box model also.
post logs also. if you told me your available satellites somewhere else state it once again' which sats do you have beside 95E.
User avatar
Golden
Vip
Vip
Posts: 4648
Joined: 14 Jun 2013, 6:00 am
Location: Pakistan
Has thanked: 1301 times
Been thanked: 671 times

Re: Oscam Vs Wicardd reader/proxie connection time

Post by Golden »

suleman84 wrote: :prescription: I Also Try To Wicard But Not Scuess
Not Working In My Box ..But Mgcamd is Working Fine..and Cccam Also Good Ecm For Channel Changing
"crazyindianstranger" is talking about oscam'
suleman84' actually you might not be able to configure wicardd in your receiver.
keep using handy toys like you already mentioned in your post.
crazyindianstranger
Senior Registered Member
Senior Registered Member
Posts: 897
Joined: 11 Nov 2014, 11:51 am
Location: India
Been thanked: 1 time

Re: Oscam Vs Wicardd reader/proxie connection time

Post by crazyindianstranger »

oscam.log

2015/05/23 20:03:23 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:03:23 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:03:25 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:03:25 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:25 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:25 569358 c (ecm) anonymous (0B00&000000/0000/820A/58:49D17412C8FE275F84AB60C28F98445D): found (1672 ms) by maxhd (P/4/4/4)
2015/05/23 20:03:25 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:25 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:03:28 566AB0 p (newcamd) Newcamd Server: mgcamdreceiver.ddns.net:22455 - UserID: 2
2015/05/23 20:03:28 566AB0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:28 566AB0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:28 566AB0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:28 566AB0 p (reader) mgcamdreceiver [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:03:36 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:03:36 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:03:37 569358 c (ecm) anonymous (0B00&000000/0000/820A/58:F0A1A78C6039A4DB3633515CAA93317A): found (1215 ms) by maxhd (P/3/3/4)
2015/05/23 20:03:38 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:03:38 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:38 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:38 566AB0 p (newcamd) Newcamd Server: mgcamdreceiver.ddns.net:22455 - UserID: 2
2015/05/23 20:03:38 566AB0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:38 566AB0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:38 566AB0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:38 566AB0 p (reader) mgcamdreceiver [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:03:38 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:38 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:03:48 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:03:48 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:03:50 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:03:50 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:50 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:50 569358 c (ecm) anonymous (0B00&000000/0000/820A/58:3DA91BCA3096984256D6084461BEE93F): found (1818 ms) by maxhd (P/3/3/4)
2015/05/23 20:03:50 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:50 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:03:54 566AB0 p (newcamd) Newcamd Server: mgcamdreceiver.ddns.net:22455 - UserID: 2
2015/05/23 20:03:54 566AB0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:03:54 566AB0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:03:54 566AB0 p (newcamd) Connection closed to remote server
2015/05/23 20:03:54 566AB0 p (reader) mgcamdreceiver [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:01 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:04:01 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:04:02 569358 c (ecm) anonymous (0B00&000000/0000/820A/58:26F45CA4F923B2B40290C073443BEFEB): found (961 ms) by sunn (P/4/4/4)
2015/05/23 20:04:03 566AB0 p (newcamd) Newcamd Server: mgcamdreceiver.ddns.net:22455 - UserID: 2
2015/05/23 20:04:03 566AB0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:04:03 566AB0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:04:03 566AB0 p (newcamd) Connection closed to remote server
2015/05/23 20:04:03 566AB0 p (reader) mgcamdreceiver [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:04 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:04:04 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:04:04 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:04:04 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:04:04 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:15 569358 c (ecm) anonymous (0B00&000000/0000/820A/58:B159FCD7CF25125FD0763FF0D1D2E309): found (1369 ms) by sunn (P/4/4/4)
2015/05/23 20:04:18 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:04:18 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:04:21 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:04:21 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:04:21 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:04:21 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:04:21 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:22 566AB0 p (newcamd) Newcamd Server: mgcamdreceiver.ddns.net:22455 - UserID: 2
2015/05/23 20:04:22 566AB0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:04:22 566AB0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:04:22 566AB0 p (newcamd) Connection closed to remote server
2015/05/23 20:04:22 566AB0 p (reader) mgcamdreceiver [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:24 566AB0 p (reader) mgcamdreceiver [newcamd] connecting to mgcamdreceiver.ddns.net:22455
2015/05/23 20:04:24 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
2015/05/23 20:04:25 5665E0 p (newcamd) Newcamd Server: rockcam.net:25698 - UserID: 2
2015/05/23 20:04:25 5665E0 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
2015/05/23 20:04:25 5665E0 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/05/23 20:04:25 5665E0 p (newcamd) Connection closed to remote server
2015/05/23 20:04:25 5665E0 p (reader) rockcam [newcamd] disconnected: reason disconnect on receive
2015/05/23 20:04:26 5665E0 p (reader) rockcam [newcamd] connecting to rockcam.net:25698
The real fun is in doing experiments, not in watching the crap programmes!!!!!
crazyindianstranger
Senior Registered Member
Senior Registered Member
Posts: 897
Joined: 11 Nov 2014, 11:51 am
Location: India
Been thanked: 1 time

Re: Oscam Vs Wicardd reader/proxie connection time

Post by crazyindianstranger »

oscam.conf

[global]
logfile = /tmp/oscam.log
fallbacktimeout = 0
unlockparental = 1
nice = -1
maxlogsize = 2048
suppresscmd08 = 1

[dvbapi]
enabled = 1
pmt_mode = 1
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 0.0.0.1,127.0.0.1,0.0.0.0-255.255.255.255
hideclient_to = 15
The real fun is in doing experiments, not in watching the crap programmes!!!!!
crazyindianstranger
Senior Registered Member
Senior Registered Member
Posts: 897
Joined: 11 Nov 2014, 11:51 am
Location: India
Been thanked: 1 time

Re: Oscam Vs Wicardd reader/proxie connection time

Post by crazyindianstranger »

oscam.server

[reader]
label = maxhd
enable = 1
protocol = newcamd
device = maxhd.ddns.me.uk,44444
key = 0102030405060708091011121314
user = user
password = pass
reconnecttimeout = 30
fallback = 1
fix9993 = 0
audisabled = 1
group = 1

[reader]
label = rockcam
enable = 1
protocol = newcamd
device = rockcam.net,25698
key = 0102030405060708091011121314
user = user
password = pass
reconnecttimeout = 30
fallback = 1
fix9993 = 0
audisabled = 1
group = 1

[reader]
label = mgcamdreceiver
enable = 1
protocol = newcamd
device = mgcamdreceiver.ddns.net,22455
key = 0102030405060708091011121314
user = user
password = pass
reconnecttimeout = 30
fallback = 1
fix9993 = 0
audisabled = 1
group = 1

[reader]
label = sunn
enable = 1
protocol = cccam
device = sunn.ddns.net,6700
user = user
password = pass
ccckeepalive = 1
audisabled = 1
group = 1
The real fun is in doing experiments, not in watching the crap programmes!!!!!
crazyindianstranger
Senior Registered Member
Senior Registered Member
Posts: 897
Joined: 11 Nov 2014, 11:51 am
Location: India
Been thanked: 1 time

Re: Oscam Vs Wicardd reader/proxie connection time

Post by crazyindianstranger »

I m using cloud ibox3 with openatv 5.0 image. Oscam installed from openatv feeds.

oscam.version

Unix starttime: 1432391481
Starttime: 23.05.2015 20:01:21
Version: oscam-1.20-unstable_svn-r10659
Compiler: mipsel-openpli40-linux-gnu
Box type: ini-1000sv (generic)
ConfigDir: /usr/keys/oscam_atv/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
****** guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
******: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes
The real fun is in doing experiments, not in watching the crap programmes!!!!!
User avatar
Golden
Vip
Vip
Posts: 4648
Joined: 14 Jun 2013, 6:00 am
Location: Pakistan
Has thanked: 1301 times
Been thanked: 671 times

Re: Oscam Vs Wicardd reader/proxie connection time

Post by Golden »

your configurations are wrong !
make corrections and give feed back.


Image
User avatar
Shahid Geo
Moderator
Moderator
Posts: 9897
Joined: 16 Jun 2013, 9:51 pm
Has thanked: 6409 times
Been thanked: 3211 times

Re: Oscam Vs Wicardd reader/proxie connection time

Post by Shahid Geo »

Soon i start here Oscam Server insha ALLAH

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot], No User AvatarClaude [Bot], No User Avatarmeta-externalagent [Bot], No User AvatarTrident [Bot], User avatarYandex [Bot] and 5 guests