helpe me talibb

[zahidjutt]

i have startrack2020plus butt stop the boot and show null rescue image notworking

[talibb]

dosr method rescue image computer ethernet with settings ip192.168.40.19 in my network local area connection=propertis=internet protocol TCP/IP and select following ip address apply and save
and tool of ugrade
Upgrade rescure spark by tftp:
Upgrade Step: 1.copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
2.select folder in TFTP tools:
3.Keep Pressing [OK] Button in Front Panel, then power on STB.
4.After 5 seconds you will see [Forc] in LED, release [OK] button and press

Button.
5.If everything OK, You will see [T LD] shining in LED
and you will see some debug information in TFTP Server,
like “Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary mode Mon Oct 25 14:03:33 2010: Successful.”
6.if upgrade success, You will see [SUCC] and STB reboot automatically If upgrade not finishes in 5 minutes,
then there must be something wrong, please check your configuration and re-try.
computer ethernet loader download
http://www.4shared.com/rar/Fg6DZolFba/r ... tpd32.html" onclick="window.open(this.href);return false;
softwear rescue 7162 chip startrack2020 hd plus
http://www.4shared.com/zip/2HfmRQDS/spa ... oblem.html" onclick="window.open(this.href);return false;?
bhai aiup linux usb say bhee kar sakitay hoo
mostly 3.0 usb latest
these models are also ok
1=kindstone dtse109
2=dt 109
usb must be linux supported
aiup ntfs say usb formate karoo ise tool say
http://www.4shared.com/rar/4m-cV2cEba/H ... rmate.html" onclick="window.open(this.href);return false;?

[talibb]

agar bilkul rescue naheen utha raha toi
hyperterminal computer windows per ye try karoo
rs232 port recever upgrade lead wire loo
computer windows min hyper terminal bnaio
Attention DO It on your Own Risk;;;;;;;
all programms=accessries=communication=hyperterminal=new connection
Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None
ABHI 232 port computer to recever lagaio
recever off karoo
terminal start karoo
[Manu] recevier ko press kar kay rakhoo =power on karoo ab computer per ye aie ga
ab ye command lagaio
PDK7105>set load _addr 80000000
PDK7105>save
agar ise kay bad bhee na hoo to ye commadn check karoo
PDK7105>set load _addr 0*80000000
PDK7105>save

[zahidjutt]

TAHK BAHI