HELP NEEDED REGARDING DM 800HD SIM210

[AtteG]

ASALAAM O ALIKUM

ALIRAZA BHAI AND EXPERTS

MERA DREAMBOX 800HD PVR SIM 210 BOOT PE RUK GYA HAI RED LIGHT BLINK KAR RAHI HAI R STOP LIKHA HUA HAI JAB IMG KIYA WITH THE HELP OF BROWSER COMPLETE HOGYA MGR PHIR B DISPLAY NI AA RHA AUR NA HI BOOT HO RHA HAI PLZ HELP ME

[FARRUKH]

image correct karo. wrong image se boot pe rukta hay yeh ya phir 64mb se zyada wala image.

[AtteG]

FARRUKH BHAI MAIN 2010 SY USE KAR RHA HO YEH BOX WRONG IMG NI KIYA IMG CORRECT HAI PLI 44MB KA HAI AUR IMG PORA HO B JATA HAI MGR BOX BOOT NI HOTA

[dodi2000]

Salaam Bhai, mujy b yahi masla aa gia tha mery dm 800 hd pvr sim 2.01 pr too ma nay iss utility say image kia tha to mera problem solve ho gia tha. app bhe ek try kr lo , oor haan Aliraza bhai expert hain dekhain wo kia khty hain.
ye utility khud he sim detect kr laty hay.orr no ca found error b remove kr dety hay.

http://speedy.sh/uqxxq/JapharFlasher.rar" onclick="window.open(this.href);return false;

[Aliraza63]

ASALAAM O ALIKUM

ALIRAZA BHAI AND EXPERTS

MERA DREAMBOX 800HD PVR SIM 210 BOOT PE RUK GYA HAI RED LIGHT BLINK KAR RAHI HAI R STOP LIKHA HUA HAI JAB IMG KIYA WITH THE HELP OF BROWSER COMPLETE HOGYA MGR PHIR B DISPLAY NI AA RHA AUR NA HI BOOT HO RHA HAI PLZ HELP ME

Bad sector in flash .. Clean it through Sunray flash up
and use Doodi's posted tool then

[AtteG]

bhai sunray flash ka link dain r thora sa samjha dain kese use karna hai dodi bhai k tool sy abhi img kar rha ho 73 mins mangay total usne honay mein use network ko select kiya phir b

[AtteG]

ALi bhai sunray flash up nsy b img kiya box flash successfully likha ata hai but box boot pe ruka hua hai display ni dy rha r doodi bhai walay software sy b kiya same situation plz help

[AtteG]

dm ki front pannel pe dhcp stop likha hua ata hai r red light blink karti rehti hai aur agr networking cable lagao tu phir ip show hojati ha

[Aliraza63]

dm ki front pannel pe dhcp stop likha hua ata hai r red light blink karti rehti hai aur agr networking cable lagao tu phir ip show hojati ha

Flash has a bad sector browse the forum and search post " HOW TO FIX FLASH BAD SECTOR(SOLVED)" or goole it

[dodi2000]

google to fix the problem in other forum by Aliraza63
here is the copy paste of that post

Problem solved successfully

METHOD USED

1. Connect Dn with Dream Up with RS 232 cable (Version worked for me 1.3.3.7)
2. Uncheck Network
3. Check recovery bad sector in extra
4. Select Port and Press Connect
5. Power on DM

IF IT SHOWS RECOVERING BAD SECTOR IN UPDATING

Always use Clean light Image like Merlin which is mostly 38MB without addons and keys
1. Let it complete it will take time but relax.
2. if it shows again at the end near finishing point that it still has error then Use any previouse version of Dream UP i tested 133 and 132 . again start from begining
its sure it will recover it.

IF IT DOESNT SHOW ANY ERROR IN UPDATING

then it means flash is not corrupted its just giving error due to bad image mostly the modified .
Now its so easy Let it also complete
When its finished reboot and again set the IP with front panel upgrade and open Browser and install Original Pli image
***
Keep in mind if ur box is clone only the original image which can erase ur whole flash
1. ur box will go NO CA ERROR .
2.Never mind Search Ferret posts of solving No CA FOUND TOOLS
3. use this tool and re alive ur box .
4. Now again send SSL first with browser and send any ur desired image .
5. Now the Box is ready for u

IF DM DONT GET ANY LOADER THEN USE THIS TIPS

Copied from another post


Description of how "close" the bad sectors in the Dreambox to flash image in browser
Description of how "close" the bad sectors in the Dreambox to flash image via internet browser
where we have no rs232 port on your computer, or DreamUp crashes all the time with bad sectors error which can not be repaired.

First DM800 off.
Second We press on the chassis power / power plug at the same time / procedure how to upload image ... /
Third STOP - DHCP - IP to display ...
4: Start**** Run**** telnet [ip Dreambox]**** Enter
5: We are in the BIOS of our Dreambox.



6: Set the picture as that is an option
"Flash Sector Recovery" to "enabled"



7: Then go to the last tab "Exit" and save settings / valid without rebooting the tuner /

8: The next steps are the same as when loading the image, the browser will have the additional option enabled message "bad sector recovery enabled"




9: Or, another message / messages when finding bad sectors in a flash they will be "closed" as we are notified.



10: After uploading the image we "reboot" and already we have a fully functional image.